Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
newbie repairing plaster in a 100 year old home
I am an IT guy and have ignored the plaster problems in my old
townhouse-style home. The previous owners white-washed everything prior to the sale. 6 years later I need to repair the plaster. Essentially there are cracks where the ceiling and walls meet in about 50% of the corners in wait for it my entire house. So easily 20 cracks if not more. I also have a major 4 foot crack with some folding/bulging in an upstairs hallway and a large 2 ft bulge/crack in my basement. 3 years ago I repaired drywall (not plaster) after electrical work and overall the repairs worked and still look good. I have no experience with plaster and my parents had recurring problems with plaster, plaster repairs and leaks, so I'm hesitant to start. Would Crown Molding be a reliable way to cover up these corner cracks or should I be concerned that in a house like this, with known shifting, crown molding could become an issue. I have never seen problems with crown molding in my neighborhood, fyi. But what about the other cracks? can I repair a 1x4 ft patch with reasonable success or the 2 ft square patch? I also don't believe these cracks were caused by water. I believe it was shifting between my house and the ones attached on either side. I found instructions like: http://www.diynetwork.com/diy/hi_wal...685862,00.html Do those make sense or are they leaving out critical details? Thanks for any advice and other info. Don |
#3
Posted to alt.home.repair
|
|||
|
|||
newbie repairing plaster in a 100 year old home
Wow! thanks for the speedy and detailed response.
Yes, all the cracks are thinner than 1/4 in. To clarify, when I used the term "bulging" I now know I meant the plaster was pulling away from the lath. That occurs in one noticeable spot along a 4 ft crack. Some of the plaster effects in my house are curved and appear modified during the Art Deco era, so yeah, not going to drywall the entire house. I'm going to start small and work from there. thanks, Don |
#4
Posted to alt.home.repair
|
|||
|
|||
newbie repairing plaster in a 100 year old home
wrote in message oups.com... Wow! thanks for the speedy and detailed response. Yes, all the cracks are thinner than 1/4 in. To clarify, when I used the term "bulging" I now know I meant the plaster was pulling away from the lath. That occurs in one noticeable spot along a 4 ft crack. Some of the plaster effects in my house are curved and appear modified during the Art Deco era, so yeah, not going to drywall the entire house. I'm going to start small and work from there. thanks, Don Some hints, based on suffering through the first room in my house, and then getting smarter as the work progressed: 1) Not sure if all plaster (powder mixes) act the same, but the stuff I used got warm and began to "set" in the pan if I mixed it too much. So, work in small batches, and mix ONLY until it's all moist. Then, apply right away. It helps to have two or three pans. When you're done with one, set it aside and let the plaster residue dry, while you continue with a clean pan. You don't want dry chunks of plaster mixed in with the fresh batch you're about to mix. The pans will dry quickly if you scrape out most of the residue. For the remainder, hold upside down over a trash can and smack them. 2) If you find that you need to remove big chunks right down to the lath, be sure to apply the plaster in thin layers, and then wait at least a day for it to dry. This might take longer if the wall you're working on is cold. And, trying to help it along with lamps or hair dryer will not go well. Don't ask how I know this. Just be patient. Watch the color change as it dries. 3) Sanding will obviously create dust. Buy or borrow a shop vac that can have a hose attached to the exhaust. Put the hose out the window if possible, so the exhaust doesn't blow around the dust you haven't gotten to yet. Or, at least aim the hose away from the area you haven't vacuumed yet. 4) If some cracks are in areas where you feel there'll be more flexing, or a door slamming nearby, prepare the crack according to the instructions on the web site you already looked at. Fill the crack with plaster, but leave a groove 1/8" deep. Cover the crack with a piece of mesh drywall tape, pressing the tape into the groove with your fingernail or the blunt end of a small tool. Flatten the rest of the tape against the surrounding area. (The tape's sort of waxy, and will stick without help, assuming you remove any dust first). Finish the patch job with drywall mud. 5) If you end up using screws for some repairs, be aware that lath can be very weird to screw into. It's gummy and dense (or something), and will sometimes want to bend away from the screws, rather than allow them to dig in. So, pick up some long drill bits in the appropriate sizes, and drill pilot holes. Incidentally, this characteristic of lath is one reason why people who slam nails into plaster walls should be fed to the sharks. The pounding can make the lath bounce inward and separate from the plaster, and then you have the mess that you've already seen. 6) When the plastering's all done, be sure to give it at least a week to dry before priming. As mentioned earlier, you'll be able to see the color change. On interior walls, you can often FEEL the temp difference as one are dries before another. |
#5
Posted to alt.home.repair
|
|||
|
|||
newbie repairing plaster in a 100 year old home
Would Crown Molding be a reliable way to cover up these corner cracks
Sure. But be prepared for some headaches trying to line up the edges. If the house settled enough to crack the plaster, it also settled enough to be out of square. or should I be concerned that in a house like this, with known shifting, crown molding could become an issue. What shifting? This is an old house, it should be done settling by now. If these are new cracks then you need to find out what's started moving. Rectify that problem before you waste your time patching what's only going to crack again. I believe it was shifting between my house and the ones attached on either side. What're we talking about here? An actual town house or row house? I'm from Baltimore originally so I know the difference. Calling those tiny little houses "town houses" doesn't elevate them into the more solidly built as 'houses in town' for folks from the country. Row houses are often made from inferior brick and rather lacking in engineering. If you've got problems because of the houses next to you then your next call should be to a structural engineer. -Bill Kearney |
#6
Posted to alt.home.repair
|
|||
|
|||
newbie repairing plaster in a 100 year old home
In my place there were developing cracks between the wall and ceiling.
One (ok a couple) tubes of latex caulk applied to the corner fixed it right up. The caulk flexes so the cracks have not opened up again. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Desperate for advice on replacing dead 255K BTU furnace in 3200 sq foot house | Home Repair | |||
repairing lath + plaster ceiling | UK diy | |||
Repairing home in Pennsylvania BS! | Home Repair | |||
How can I fix cracks in plaster of old house? | Home Repair |