Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
AC problem
I had a new AC/heat pump system installed about 2 years ago, and this
morning I woke to the smell of melting plastic and a loud pop. This is what happened: www.math.umd.edu/~peterson/melted.jpg Could someone tell me if this was a problem with poor installation/parts, or is it a common problem? The disconnect is a square d fs222r series f1. Thanks! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Outside drain problem... Who is responsible? | UK diy | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |