Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to alt.home.repair,alt.energy.homepower
|
|||
|
|||
![]()
"glukane" wrote:
Hi, my house's windows gets wet in the inside all the time... Get rid of the moisture source. Nick |
#2
![]()
Posted to alt.home.repair
|
|||
|
|||
![]()
Nick says "get rid of the moisture source" well nick you dont need one
to have aluminum single or dual pane to condense, unless you mean get rid of the house. |
#3
![]()
Posted to alt.home.repair
|
|||
|
|||
![]()
m Ransley wrote:
Nick says "get rid of the moisture source" well nick you dont need one to have aluminum single or dual pane to condense... I disagree. Nick |
#4
![]()
Posted to alt.home.repair
|
|||
|
|||
![]() I agree with Nick on this one. Making the house cooler will not help unless you do it with an air conditioner or dehumidifier to remove some of the moisture. You want to LOWER the dew point, not raise it. Getting rid of the moisture source is the best way to lower the dew point inside the house. Using better windows would also help, by raising the indoor surface temperature of the windows above the dew point. You could also put plastic film over the inside or outside of the windows would also help, as Vaughn & Joseph stated. Raising the temperature in the house would also help raise the inside surface temperature of the windows, but that could get quite expensive. Stretch |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Pull down window shade keeps breaking on the inside | Home Repair | |||
WindowsRUs | Home Repair | |||
Spa (Hot tub) Renovation - Gas? Solar? | Home Repair | |||
Rain seeping inside through concrete block wall above grade (Warning: LONG explanation) | Home Repair | |||
How to mount window air c | Home Repair |