Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
unstabbing a electrical plug
No secret, if it doesn't release, just cut the wire and re strip it
"Evon Barvinchack" wrote in message nk.net... I am replacing some switches that the wires were trimmed and pushed into the switch instead of bending the wire around the screw. My problem is pushing a small screw driver into the release hole does not release the wire. Is this a common problem or am I just not doing something correctly? What's the secrete? ---------------------------------------------------------------------------- ---- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Burke Millrite Spindle Bearings Access Plug | Metalworking | |||
Help Me Pull The Plug | Metalworking | |||
Installing Ceiling Fan with Red wire on electrical box. | Home Repair | |||
Forthcoming Building Regulations on electrical work (Part P) | UK diy | |||
Replace Dyson Plug | UK diy |