VCR Problem
 

Tapes are frequently being pinched in both play and record modes, but
it's happening on both machines. Could this be a tape problem? Not
likely that both VCRs would be screwing up at the same time. Thanks

VCR Problem
 

You may have transferred dirt or something sticky from one VCR to another
using a particular tape

Clean the heads using a head cleaner tape that uses a wet cleaning solution.
If that dosen't work, take the cover off and clean all the rollers and play
and record heads with a Qtip and Isopropyl alcohol (not rubbing alcohol) or
denatured alcohol



"Jack" wrote in message
...
Tapes are frequently being pinched in both play and record modes, but
it's happening on both machines. Could this be a tape problem? Not
likely that both VCRs would be screwing up at the same time. Thanks

VCR Problem
 

http://www.repairfaq.org/REPAIR/F_Repair.html

VCR Problem
 

Wrong NG...

"Jack" wrote in message
...
Tapes are frequently being pinched in both play and record modes, but
it's happening on both machines. Could this be a tape problem? Not
likely that both VCRs would be screwing up at the same time. Thanks

VCR Problem
 

"glenn P" wrote in message
...
Wrong NG...

"Jack" wrote in message
...
Tapes are frequently being pinched in both play and record modes, but
it's happening on both machines. Could this be a tape problem? Not
likely that both VCRs would be screwing up at the same time. Thanks


What's a VCR????

;-]