Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Creative Uses For Old Plumbing Copper?
I've been ripping out a lot of old plumbing in the last little while and now
I've got a couple of dozen elbows with various lengths of pipe in them. What should I do with this stuff? I've thought of trying to reclaim the elbows by sweating the pieces apart but it seems like a lot of work. I can't bear the thought of sending it to the landfill. And I don't know if it would pay for the gas required to drive it to a scrapyard either, but maybe that's the way to go. Any ideas or projects that use old copper plumbing? Thx. |
#2
|
|||
|
|||
Creative Uses For Old Plumbing Copper?
According to Alan Smithee :
I've been ripping out a lot of old plumbing in the last little while and now I've got a couple of dozen elbows with various lengths of pipe in them. What should I do with this stuff? I've thought of trying to reclaim the elbows by sweating the pieces apart but it seems like a lot of work. I can't bear the thought of sending it to the landfill. And I don't know if it would pay for the gas required to drive it to a scrapyard either, but maybe that's the way to go. Any ideas or projects that use old copper plumbing? Thx. Sculpture, especially water fountains ;-) [Our house was custom built by a plumber for himself. He obviously had lots of extra bits and pieces, the antenna mast and all the closet rods are copper pipe. So far our closet renovations have practically paid for themselves in liberated copper pipe ;-)] Scrapyards may pay as much as a buck a pound or so for copper. Some "architectural scrap dealers" may pay more for useable fittings. I've liberated modest amounts of more normal sized copper, and that gets pulled apart, and slowly gets reused in new projects. -- Chris Lewis, Una confibula non set est It's not just anyone who gets a Starship Cruiser class named after them. |
#3
|
|||
|
|||
Creative Uses For Old Plumbing Copper?
Chris Lewis wrote:
According to Alan Smithee : I've been ripping out a lot of old plumbing in the last little while and now I've got a couple of dozen elbows with various lengths of pipe in them. What should I do with this stuff? I've thought of trying to reclaim the elbows by sweating the pieces apart but it seems like a lot of work. I can't bear the thought of sending it to the landfill. And I don't know if it would pay for the gas required to drive it to a scrapyard either, but maybe that's the way to go. Any ideas or projects that use old copper plumbing? Thx. Sculpture, especially water fountains ;-) [Our house was custom built by a plumber for himself. He obviously had lots of extra bits and pieces, the antenna mast and all the closet rods are copper pipe. So far our closet renovations have practically paid for themselves in liberated copper pipe ;-)] Scrapyards may pay as much as a buck a pound or so for copper. Some "architectural scrap dealers" may pay more for useable fittings. I've liberated modest amounts of more normal sized copper, and that gets pulled apart, and slowly gets reused in new projects. That gave me a great idea. I've always wanted an "outdoor" shower I can go crazy and put in a bunch of extra spouts. A bit late in the year but why not get it ready for spring. I've even got the shower fixture valve. Thanks |
#4
|
|||
|
|||
Creative Uses For Old Plumbing Copper?
"Alan Smithee" wrote in message news:ebY7f.315791$tl2.133473@pd7tw3no... I've been ripping out a lot of old plumbing in the last little while and now I've got a couple of dozen elbows with various lengths of pipe in them. What should I do with this stuff? I've thought of trying to reclaim the elbows by sweating the pieces apart but it seems like a lot of work. I can't bear the thought of sending it to the landfill. And I don't know if it would pay for the gas required to drive it to a scrapyard either, but maybe that's the way to go. Any ideas or projects that use old copper plumbing? Thx. Set it out by the curb on a non-trash day. Odds are it'll be gone by the time you get home from work. Out of landfill, and some poor SOB will get a little cash for it. I cleared the basement of a family rental house that way- 3/4 of the stuff was gone by morning. aem sends... |
#5
|
|||
|
|||
Old Plumbing Copper? Recycle!
"Alan Smithee" wrote in message
news:ebY7f.315791$tl2.133473@pd7tw3no... I've been ripping out a lot of old plumbing in the last little while and now I've got a couple of dozen elbows with various lengths of pipe in them. What should I do with this stuff? I've thought of trying to reclaim the elbows by sweating the pieces apart but it seems like a lot of work. I can't bear the thought of sending it to the landfill. And I don't know if it would pay for the gas required to drive it to a scrapyard either, but maybe that's the way to go. Any ideas or projects that use old copper plumbing? Thx. There is likely a recycling yard not too far from you. I wouldn't look at it a "would it pay for the gas" argument. Copper is a finite resource, much rarer than iron, steel, and aluminum, and should not be tossed, just for conservation reasons alone, not to mention that in a landfill environment copper salts leach out of landfill, potentially poisoning groundwater reservoirs. Further, copper scrap can be melted into new products with a fraction of the energy needed to produce the metal from ores. I keep a big box of sawn up copper and brass trash. Once it gets fairly heavy, I take it to my local recycler. |
#6
|
|||
|
|||
Old Plumbing Copper? Recycle!
'round here its worth 70-90 cents a pound
"Roger Taylor" wrote in message ... "Alan Smithee" wrote in message news:ebY7f.315791$tl2.133473@pd7tw3no... I've been ripping out a lot of old plumbing in the last little while and now I've got a couple of dozen elbows with various lengths of pipe in them. What should I do with this stuff? I've thought of trying to reclaim the elbows by sweating the pieces apart but it seems like a lot of work. I can't bear the thought of sending it to the landfill. And I don't know if it would pay for the gas required to drive it to a scrapyard either, but maybe that's the way to go. Any ideas or projects that use old copper plumbing? Thx. There is likely a recycling yard not too far from you. I wouldn't look at it a "would it pay for the gas" argument. Copper is a finite resource, much rarer than iron, steel, and aluminum, and should not be tossed, just for conservation reasons alone, not to mention that in a landfill environment copper salts leach out of landfill, potentially poisoning groundwater reservoirs. Further, copper scrap can be melted into new products with a fraction of the energy needed to produce the metal from ores. I keep a big box of sawn up copper and brass trash. Once it gets fairly heavy, I take it to my local recycler. |
#7
|
|||
|
|||
Old Plumbing Copper? Recycle!
"There is likely a recycling yard not too far from you. I wouldn't look
at it a "would it pay for the gas" argument. Copper is a finite resource, much rarer than iron, steel, and aluminum, and should not be tossed, just for conservation reasons alone, not to mention that in a landfill environment copper salts leach out of landfill, potentially poisoning groundwater reservoirs." Yeah, that makes a lot of sense. Burn gas and wear out the car just to take some scrap to a recycling center, regardless of whether you get enough money to make it worthwhile? I guess oil isn't a finite resource? And as for not tossing it in the trash for safety reasons, that's just plain crazy. Just look at all the other streams of various types of trash that are legally going into landfills, many of them containing copper and far worse. Household batteries for example. The leachate from all landfills contains all kinds of toxins and has to be contained today with a liner. Whether this guy's copper pipe winds up there or not isn't going to make any difference. It's fairly likely the copper would be recovered at the waste facility anyway, prior to the trash going into the landfill. That's what's done here in NJ. |
#8
|
|||
|
|||
Old Plumbing Copper? Recycle!
Yeah, that makes a lot of sense. Burn gas and wear out the car just
to take some scrap to a recycling center, regardless of whether you get enough money to make it worthwhile? Nah, do nothing, like you. |
#9
|
|||
|
|||
Old Plumbing Copper? Recycle!
"Nah, do nothing, like you. "
Isn't it time for you to go hug a tree? |
#10
|
|||
|
|||
Old Plumbing Copper? Recycle!
wkearney99 wrote: Yeah, that makes a lot of sense. Burn gas and wear out the car just to take some scrap to a recycling center, regardless of whether you get enough money to make it worthwhile? Nah, do nothing, like you. His point is valid. Burning the gas to take it to the scrap yard will produce more polutants and use up more resources than the copper will produce. My method. I keep a barrel and add to it. I currently have a 50 gal barrel full and overflowing with copper wire, fuel line, etc. that has accumulated over the past 30 years. Someday when I am going that way, it will be on the PU with me (100 mile round-trip). Harry K |
#11
|
|||
|
|||
Old Plumbing Copper? Recycle!
|
#12
|
|||
|
|||
Old Plumbing Copper? Recycle!
Yeah, that makes a lot of sense. Burn gas and wear out the car just to take some scrap to a recycling center, regardless of whether you get enough money to make it worthwhile? I guess oil isn't a finite resource? That is why I said I save brass and copper in a box, at home. Eventually you'll have enough to make a trip worthwhile. Since the recycle yard is on the way to several other places I frequent, saving it up makes sense, no? Re oil as a resource, when oil gets short, we'll have to use other energy technologies, like solar, biofuels, electric, hydrogen, etc. When copper runs short, we are out of luck, short of recycling. |
#13
|
|||
|
|||
Creative Uses For Old Plumbing Copper?
"Alan Smithee" wrote in message news:ebY7f.315791$tl2.133473@pd7tw3no... I've been ripping out a lot of old plumbing in the last little while and now I've got a couple of dozen elbows with various lengths of pipe in them. What should I do with this stuff? I've thought of trying to reclaim the elbows by sweating the pieces apart but it seems like a lot of work. I can't bear the thought of sending it to the landfill. And I don't know if it would pay for the gas required to drive it to a scrapyard either, but maybe that's the way to go. Any ideas or projects that use old copper plumbing? Thx. I got about $1.10 a pound 6 months ago. That's for clean copper. If they see one old solider joint or fitting they call it dirty.( cut soldiered ends off) Phone around and get prices Some guys told me $.60 a pound. the price dose change. |
#14
|
|||
|
|||
Creative Uses For Old Plumbing Copper?
recycle it. Copper isnt cheap. (call up and find how much it is per
pound) Why not get a few pieces of brass in there and you'll get some real money! (they get some big bucks for brass) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT Need advice on plumbing new water heater to existing solid copper lines | Woodworking | |||
Aluminum wiring... | Metalworking | |||
Copper & Plastic plumbing - freely mixing and matching? | UK diy | |||
Copper Casting In America (Trevelyan) | Metalworking | |||
Determining Geologic Sources of Native American Copper | Metalworking |