leaky water shut-off valve
I turn water off to my sprinker system every fall from the basement.
The valve is a handle type that turns 90 degrees to turn water on or off. I now have a slow leak when I shut down the system. Is there a way to repair the shut-off valve or must I cut it out and replace it? |
leaky water shut-off valve
|
leaky water shut-off valve
Your know - Its a bit frustrating when we post good information like
this and never hear a peep from the orignial poster. How about a "Thanks - you samed me a lot of headache because this was such a simple fix!" Or even an "no, its not the packing, it keaks out the supply side, I guess I'll have to replace the valve thanks though" Oh well. I contribute here because I also get something back from time to time. Just last week I looked up a post I did for somone else to pull up some URLs I had researched for somone, it was time I needed my own past research! anyway... Keep up the good work. |
All times are GMT +1. The time now is 04:15 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter