Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
copper heat pipe through joists or under?
I'm adding a few sections of fin tube to a new addition. Is it better
to hang pipe (j hooks/straps) under perpendicular beams/joists or go through? My concern is both adequately supporting the pipes, and any potential difference in insulation (as this is a post and beam construction and fairly close (2') off the ground.) Thanks. |
#2
|
|||
|
|||
wrote in message oups.com... I'm adding a few sections of fin tube to a new addition. Is it better to hang pipe (j hooks/straps) under perpendicular beams/joists or go through? My concern is both adequately supporting the pipes, and any potential difference in insulation (as this is a post and beam construction and fairly close (2') off the ground.) Thanks. I would hang the pipe under the joist. Trying to drill a straight line of holes will not be easy. Trying to feed the pipe threw the wholes will even be harder. I guess it would weaken the joist. Most the time the pipe is hung under the joist. They make a plastic pipe hanger just for that purpose (Most people call them flying ass wholes) I would put about every 4th joist for 3/4 copper |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cheap heating | UK diy | |||
Sweating large diameter copper pipe | Home Repair | |||
OT - Humor - US Army Pipe Specs | Metalworking | |||
Aluminum wiring... | Metalworking | |||
Determining Geologic Sources of Native American Copper | Metalworking |