Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
cfjwang
 
Posts: n/a
Default REPOST: Please help identify old Cutler Hammer circuit breaker

Repost to provide the correct picture of the metal bar. Please note that I
have exhausted the largest local electric supply house, Home Depot, eBay,
ETA (internet search of catalog), etc.

I bought a very old house and have difficulty finding a replacement circuit
breaker. The control panel is labeled as Cutler Hammer. The closest
circuit breaker I can find locally is CH130 (1 pole, 30A), shown at the top
of
http://home.comcast.net/~cfjwang/CH-Breakers.jpg . The bottom part is the
one I am trying to replace. It has a notch on one side. There is metal bar
inside the control panel that prevents the CH130 from being plugged in,
while the notch on the old circuit breaker allows for the insertion. (The
metal bar is shown in the lower middle part of
http://home.comcast.net/~cfjwang/Bar.jpg).

Can anyone help me identify what type of circuit breaker this is and where I
can buy these?

Best regards,

Jerry



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FAQ: HAND TOOLS (Repost) Groggy Woodworking 0 January 16th 05 10:56 AM
Cabinet Design Centre v7.0 - Cubit, 20-20 Kitchen Design V6.1,CabinetVision Solid, Planit Millennium II [2 CDs], TurboCAD Pro V9.0 [3 CDs] (Turbocad Pro V9.0, TurboCad Deluxe 9.2 FloorPlan v7.3, TurboProjectExpress v4S), Big Hammer Do It Yourself (De TEL Woodworking 0 February 6th 04 06:34 AM
20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II [2CDs], TurboCAD Pro V9.0 [3 CDs] ( Turbocad Pro V9.0, TurboCad Deluxe 9.2FloorPlan v7.3, TurboProject Express v4S), Big Hammer Do It Yourself(Deck Designer v1, Fence Designer v5, P TEL Home Repair 0 January 6th 04 08:42 AM
Water Hammer from Toilet anon UK diy 7 December 4th 03 01:36 PM
Chicago Electrics Rotary Hammer Drill Review Barry Criner Metalworking 0 September 21st 03 02:20 PM


All times are GMT +1. The time now is 10:44 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"