DIYbanter - general contractor charges

DIYbanter (https://www.diybanter.com/)

- Home Repair (https://www.diybanter.com/home-repair/)

- - general contractor charges (https://www.diybanter.com/home-repair/121169-general-contractor-charges.html)

September 12th 05 07:59 PM

general contractor charges

What is a "reasonable" profit and overhead surcharge when my general
contractor has a sub-contractor do work for him? We're doing a large
residential house by "time and materials".

RicodJour

September 12th 05 08:18 PM

wrote:
What is a "reasonable" profit and overhead surcharge when my general
contractor has a sub-contractor do work for him? We're doing a large
residential house by "time and materials".

You will get answers that are all over the place with an open-ended
question like that. Reasonable to whom? A GC's overhead typically
runs in the 30-35% range, but depending on the size of their business,
efficiency, the type of project, etc. it can vary above or below that.
Because a sub is doing a particular aspect of the work, that doesn't
mean the GC's overhead on that aspect will be less, it could very well
be more. The GC also frequently handles callbacks, and is responsible
for the warranty regardless whether the sub is still around or not.
Only your GC can tell you what he feels is reasonable.

If you don't trust your contractor, and feel he may gouge you, why
would you go any further? Find someone you can trust and work it out.

R

Phil Scott

September 12th 05 08:48 PM

wrote in message
oups.com...
What is a "reasonable" profit and overhead surcharge when my
general
contractor has a sub-contractor do work for him? We're doing
a large
residential house by "time and materials".

10% is standard... in some areas with some generals 40% is
common.

T and M is a contractors favorite way to get a job... if he is
good and honest its fair all around... if not you will be
screwed to the wall.

if you suspect the latter, be real nice to the guy then seek
the best attorney you can find for advice on how to get rid of
him cost effectively...that can be done but it can be tricky.

Phil Scott

SQLit

September 12th 05 11:18 PM

wrote in message
oups.com...
What is a "reasonable" profit and overhead surcharge when my general
contractor has a sub-contractor do work for him? We're doing a large
residential house by "time and materials".

Reasonable? that depends on a plethora of issues. Roofers workman's
compensation is higher than a plumber for example.

What did you agree on in the beginning?

Goedjn

September 13th 05 03:56 PM

What is a "reasonable" profit and overhead surcharge when my general
contractor has a sub-contractor do work for him? We're doing a large
residential house by "time and materials".

Reasonable? that depends on a plethora of issues. Roofers workman's
compensation is higher than a plumber for example.

If it's time and materials, then the subcontractor counts as
"materials". Why should there be a surcharge?

Duane Bozarth

September 13th 05 04:36 PM

wrote:

"Reasonable? that depends on a plethora of issues. Roofers workman's
compensation is higher than a plumber for example. "

And what does that have to do with what a typical margin is for the
general contractor?

Like much of usenet, absolutely nothing... :)

[email protected]

September 13th 05 04:37 PM

"Reasonable? that depends on a plethora of issues. Roofers workman's
compensation is higher than a plumber for example. "

And what does that have to do with what a typical margin is for the
general contractor?

All times are GMT +1. The time now is 03:46 AM.