DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Sears Garage Door (https://www.diybanter.com/home-repair/115094-sears-garage-door.html)

gwtx2 July 25th 05 09:45 PM

Sears Garage Door
 
For some reason one of my Craftsman Garage doors won't open from the
outside if the car is running. It opens from the inside all the time
(car running or not). I've changed the batteries in the remote with no
luck. Any ideas?


Dan C July 25th 05 10:41 PM

On Mon, 25 Jul 2005 13:45:47 -0700, gwtx2 wrote:

For some reason one of my Craftsman Garage doors won't open from the
outside if the car is running. It opens from the inside all the time
(car running or not). I've changed the batteries in the remote with no
luck. Any ideas?


I'd suggest reading the owner's manual a few times, while you're in the
garage with the door closed and the car running. Sometimes the flux
capacitor inductive charge (which is causing your problem) will get
neutralized by this procedure. It may take up to two hours or so, but
stick with it. Good luck!

--
If you're not on the edge, you're taking up too much space.
Linux Registered User #327951


Pop July 26th 05 02:47 AM


"Dan C" wrote in message
...
On Mon, 25 Jul 2005 13:45:47 -0700, gwtx2 wrote:

For some reason one of my Craftsman Garage doors
won't open from the
outside if the car is running. It opens from the
inside all the time
(car running or not). I've changed the batteries in
the remote with no
luck. Any ideas?


I'd suggest reading the owner's manual a few times,
while you're in the
garage with the door closed and the car running.
Sometimes the flux
capacitor inductive charge (which is causing your
problem) will get
neutralized by this procedure. It may take up to two
hours or so, but
stick with it. Good luck!

--
If you're not on the edge, you're taking up too much
space.
Linux Registered User #327951


One thing certain, you aren't on any cutting edge.
Linux registered users are the scum of the earth is the
picture you're portraying lately. It ain't nuttin' to
brag about! Or are you looking for sympathy?



gwtx2 July 26th 05 02:49 PM

Great idea!!! I read the manual 10 tens with the door closed and the
car running. I'm now writing this message from Heaven. Now, I don't
have to worry about it not working.

Dan C wrote:
On Mon, 25 Jul 2005 13:45:47 -0700, gwtx2 wrote:

For some reason one of my Craftsman Garage doors won't open from the
outside if the car is running. It opens from the inside all the time
(car running or not). I've changed the batteries in the remote with no
luck. Any ideas?


I'd suggest reading the owner's manual a few times, while you're in the
garage with the door closed and the car running. Sometimes the flux
capacitor inductive charge (which is causing your problem) will get
neutralized by this procedure. It may take up to two hours or so, but
stick with it. Good luck!

--
If you're not on the edge, you're taking up too much space.
Linux Registered User #327951




All times are GMT +1. The time now is 03:34 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter