Hi, I will be replacing several asbestoes tiles that have broken /
fallen. I will not be able to remove the previous nails nor get the
new nail under the tile above it, is there a way? Should I do
anything special with the exposed nail (silicon) to prevent water
seepage under it? Some of these tiles will be continually exposed to
weather and some sheltered. I am clueless about this so any
suggestions short of some one else doing the work will be appreciated.

Thanks in advance,
Bill

Bill wrote:
Hi, I will be replacing several asbestoes tiles that have broken /
fallen. I will not be able to remove the previous nails nor get the
new nail under the tile above it, is there a way? Should I do
anything special with the exposed nail (silicon) to prevent water
seepage under it? Some of these tiles will be continually exposed to
weather and some sheltered. I am clueless about this so any
suggestions short of some one else doing the work will be appreciated.

Thanks in advance,
Bill

You can slide a hacksaw blade (hold it with your gloved hand) up under
the tile above to cut off the nails. Then you should be able to remove
all remnants of the old tile. Slide a new tile into place and just
nail it as far up as you can and cover with caulk. I've never nailed
one of those types of tiles, whether asbestos, cement fiber, or
whatever, so I don't know the details of how you keep from breaking it.
But otherwise it should be just like doing any replacement shingle
siding such as cedar shakes.

Ken