Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Greasing garage door
Hello,
My garage door is squeaking in the tracks. I tried lithium grease, but it did not work. It collects too much dust. What do you guys use ?? Thanks. |
#2
|
|||
|
|||
JackRabbit wrote:
Hello, My garage door is squeaking in the tracks. I tried lithium grease, but it did not work. It collects too much dust. What do you guys use ?? Thanks. I don't think you are going to fix it with any form of lube. Better wheels and tracks seem to be the answer. (rubber wheels) -- Joseph Meehan Dia's Muire duit |
#3
|
|||
|
|||
JackRabbit wrote:
Hello, My garage door is squeaking in the tracks. I tried lithium grease, but it did not work. It collects too much dust. What do you guys use ?? Thanks. Ear plugs... If it's riding in the track and not rolling, the bearings may be shot. Otherwise, perhaps the alignment is out so one side is rubbing somewhere. Whatever it is, grease/lube on the tracks themselves isn't the answer. |
#4
|
|||
|
|||
More often the noise is not where wheels contact the track.
More often, the noise is rusting ball bearings. Any use of lithium grease must be in the bearings - not on the wheel surface. This is also true of the wheel that carries cable from counter weight spin to bottom of door. This wheel's bearings also require a good grease such as lithium. Also balancing the counterweight springs so that the door does not 'skew' will help. Be careful. Those springs can contain a surprisingly large amount of force. JackRabbit wrote: Hello, My garage door is squeaking in the tracks. I tried lithium grease, but it did not work. It collects too much dust. What do you guys use ?? Thanks. |
#5
|
|||
|
|||
w_tom writes:
Also balancing the counterweight springs so that the door does not 'skew' will help. A skewed door is not caused by any imbalance, nor corrected by "balancing". Be careful. Those springs can contain a surprisingly large amount of force. Not "can", but "absolutely do": http://www.truetex.com/garage.htm |
#6
|
|||
|
|||
Richard J Kinch wrote:
w_tom writes: Also balancing the counterweight springs so that the door does not 'skew' will help. A skewed door is not caused by any imbalance, nor corrected by "balancing". .... Well, if it has tension springs on each side and they're not matched or tensioned, evenly, "balancing" them so they match force will certainly go a long way.... |
#7
|
|||
|
|||
Duane Bozarth writes:
Well, if it has tension springs on each side and they're not matched or tensioned, evenly, "balancing" them so they match force will certainly go a long way.... "Tension" spring? Do you mean extension? Or torsion? Most doors use torsion springs. |
#8
|
|||
|
|||
Richard J Kinch wrote:
Duane Bozarth writes: Well, if it has tension springs on each side and they're not matched or tensioned, evenly, "balancing" them so they match force will certainly go a long way.... "Tension" spring? Do you mean extension? Or torsion? Most doors use torsion springs. I don't know about "most"....I'd grant "many" but have no data on fraction of total installed base. All the ones I currently have are not torsion, although have had previously... |
#9
|
|||
|
|||
Others have tried to fix a skewed garage door by only
greasing the rails. Inspection is required to first determine if those two springs are properly balanced. If the springs are not balanced, then the door will (obviously) skew within the tracks and make more noise. Oiling bearings will trap dirt just like grease. Getting grease on ball bearings is not as easy as applying oil. But then there is good reason why ball bearings (especially on the wheel high above the dirt that supports a 90 degree cable turn) are so often greased - not just oiled. Richard J Kinch wrote: w_tom writes: Also balancing the counterweight springs so that the door does not 'skew' will help. A skewed door is not caused by any imbalance, nor corrected by "balancing". Be careful. Those springs can contain a surprisingly large amount of force. ... |
#10
|
|||
|
|||
On Tue, 19 Apr 2005 11:47:46 -0400, "JackRabbit"
wrote: Hello, My garage door is squeaking in the tracks. I tried lithium grease, but it did not work. It collects too much dust. What do you guys use ?? Thanks. Personally, I've moved away from greese. I use motor oil/light machinery oil. I put a drop or two into each wheel/axle area, and wipe down the whole track with an oily rag. Greeses were collecting dirt, and not going where they were suppose to. imho, tom |
#11
|
|||
|
|||
JackRabbit wrote:
Hello, My garage door is squeaking in the tracks. I tried lithium grease, but it did not work. It collects too much dust. What do you guys use ?? Thanks. Hi, Used syringe to lube the bearings, not the roller? Tony |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Garage Door Balancing | Home Repair | |||
Garage Door Opener Questions | Home Repair | |||
Sears Garage Door opener | Home Repair | |||
Building a Wooden Garage Door | Woodworking | |||
Garage door opener works sporadically | Home Repair |