Bathroom Wall outlets - no power-
I'm at a loss of where to look next.
Have a bathroom that shares a circuit breaker with a back bedroom, utility room and hall. Light and exhaust fan in bathroom, lights and receptacles in utility/bedroom/hall all work. I have two receptacles in the bathroom that do not. One has a label that says GFI protected, which I assume, is tailed off of a GFI. I have reset all GFI units in the house (two kitchen, two master bath) still not able to use the bathroom wall outlets. I took them apart to check wire and found what I considered loose connections, I tightened them all down and still not working. When checking for power with meter I do have power from the prong to the ground , I do not have power with I put the meter across the two prongs. Any suggestions. House is only 3 years old. I have reset feed in the main breaker box.. |
GMinTX wrote:
I'm at a loss of where to look next. Have a bathroom that shares a circuit breaker with a back bedroom, utility room and hall. Light and exhaust fan in bathroom, lights and receptacles in utility/bedroom/hall all work. I have two receptacles in the bathroom that do not. One has a label that says GFI protected, which I assume, is tailed off of a GFI. I have reset all GFI units in the house (two kitchen, two master bath) still not able to use the bathroom wall outlets. I took them apart to check wire and found what I considered loose connections, I tightened them all down and still not working. When checking for power with meter I do have power from the prong to the ground , I do not have power with I put the meter across the two prongs. Any suggestions. House is only 3 years old. I have reset feed in the main breaker box.. If I understand your test with the meter, the Neutral (White wire) is opened *somewhere*. Could be a bad wirenut splice or connection in the chain to another receptacle. You may have to identify every device on that circuit and open each box to find it. Jim |
"GMinTX" wrote:
I have two receptacles in the bathroom that do not. One has a label that says GFI protected, which I assume, is tailed off of a GFI. I have reset all GFI units in the house (two kitchen, two master bath) still not able to use the bathroom wall outlets. You haven't found the right GFI yet. Did you try in the garage? Those have to be protected as well and it's common to string the bathroom outlets off the garage outlet circuit. |
Jim and Clark, thanks for the fast reply and suggestions.
I did have a GFI in the garage that I did not check on the first go around but that was not the problem. Thanks Clark for the suggestion as I had completely forgotten about it. Jim you hit the nail on the head, or should I say GFI I took the receptacle out of the outlet in the master bath that was down line from the GFI in the master bath and low and behold the "white" lead going to the other bathroom had come out of the back of the receptacle. On closer inspection the other three leads were just barely inserted in the back. I removed them and redid the leads to the screw lugs and problem solved. Want to thank both you for you're your suggestions. Love this Internet and the helpful people using it. |
In article . com,
GMinTX wrote: I took the receptacle out of the outlet in the master bath that was down line from the GFI in the master bath and low and behold the "white" lead going to the other bathroom had come out of the back of the receptacle. On closer inspection the other three leads were just barely inserted in the back. I removed them and redid the leads to the screw lugs and problem solved. Good. This is why I NEVER use the "poke them in" option on switches and outlets. -- Rich Greenberg Marietta, GA, USA richgr atsign panix.com + 1 770 321 6507 Eastern time. N6LRT I speak for myself & my dogs only. VM'er since CP-67 Canines:Val, Red & Shasta (RIP),Red, husky Owner:Chinook-L Atlanta Siberian Husky Rescue. www.panix.com/~richgr/ Asst Owner:Sibernet-L |
All times are GMT +1. The time now is 08:45 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter