Home |
Search |
Today's Posts |
#1
|
|||
|
|||
In Car RF Transmitter
Hi. I'm trying to build myself an in-car radio transmitter, which I will
plug the headphone feed of my Mini-Disc player into, so that I can tune the car radio in and listen to it. I've tried a few circuits but so far no luck. I'm testing building on a breadboard and in the home. Does anyone know of any successful circuits of this nature, and have any pointers to them? Thanks. |
#2
|
|||
|
|||
On Fri, 03 Dec 2004 10:40:20 +0000, Jonathan Lozinski wrote:
Hi. I'm trying to build myself an in-car radio transmitter, which I will plug the headphone feed of my Mini-Disc player into, so that I can tune the car radio in and listen to it. I've tried a few circuits but so far no luck. I'm testing building on a breadboard and in the home. Does anyone know of any successful circuits of this nature, and have any pointers to them? Thanks. You could try getting hold of one of the 'micromitter' kits that have been put together for a Silicon Chip project published in the December 2002 issue of Silicon Chip magazine. It is a low power broadcast band stereo FM transmitter. Seems to be just what you are after. The spec's say it runs off 4 to 6 volts DC, pulling 28 mA at 5 volts. I think the kits are carried by Jaycar Electronics and possibly even Dick Smith Electronics stores here in Australia. Alternatively if you are game enough to try etching your own circuit board to build the thing on, the board layout is published in the article, along with complete parts list, circuit diagram and description of how it works and how to set it up. See www.siliconchip Pip |
#3
|
|||
|
|||
On Thu, 24 Mar 2005 06:56:59 +0000, Pippa Reeves wrote:
On Fri, 03 Dec 2004 10:40:20 +0000, Jonathan Lozinski wrote: Hi. I'm trying to build myself an in-car radio transmitter, which I will plug the headphone feed of my Mini-Disc player into, so that I can tune the car radio in and listen to it. I've tried a few circuits but so far no luck. I'm testing building on a breadboard and in the home. Does anyone know of any successful circuits of this nature, and have any pointers to them? Thanks. You could try getting hold of one of the 'micromitter' kits that have been put together for a Silicon Chip project published in the December 2002 issue of Silicon Chip magazine. It is a low power broadcast band stereo FM transmitter. Seems to be just what you are after. The spec's say it runs off 4 to 6 volts DC, pulling 28 mA at 5 volts. I think the kits are carried by Jaycar Electronics and possibly even Dick Smith Electronics stores here in Australia. Alternatively if you are game enough to try etching your own circuit board to build the thing on, the board layout is published in the article, along with complete parts list, circuit diagram and description of how it works and how to set it up. See www.siliconchip Pip Sorry the url seems to have suffered from my bad typing......... www.siliconchip.com.au Pip |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Auction ends in 1 hour! 2 Watt FM Stereo Broadcast 88-108 MHz LCDDigital PLL Transmitter | Electronics | |||
Auction ends in 1 day! FM Stereo Broadcast Transmitter 88-108 MHzDigital PLL LCD Display - 2 Watt | Electronics | |||
Fm Transmitter | Electronics Repair |