| Home |
| Search |
| Today's Posts |
|
#1
Posted to alt.electronics
|
|||
|
|||
Dual supply 2 OpAmps w/ single reg 2 A/D
Dan,
They are from the same power source but the Op Amps are powered thru a 12 v. regulator and ITL7660 and the A/D by a 7805 which gets its power from the 12 v regulator. I guess this is what you meant by needing some protection then correct? tango2 |
|
#2
Posted to alt.electronics
|
|||
|
|||
|
Dual supply 2 OpAmps w/ single reg 2 A/D
Tango2 wrote:
Dan, They are from the same power source but the Op Amps are powered thru a 12 v. regulator and ITL7660 and the A/D by a 7805 which gets its power from the 12 v regulator. I guess this is what you meant by needing some protection then correct? tango2 and this is in relation to.......... Daniel *** Posted via a free Usenet account from http://www.teranews.com *** |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wiring a 480V Single Phase Circuit | Home Repair | |||
| 3 core SWA for single phase supply? | UK diy | |||
| Single stage vs. dual stage furnace | Home Ownership | |||
| Converting old PC power supply to hobbyist PSU | Electronics | |||
| part II: pc power supply failure | Electronics Repair | |||
Linear Mode
