Press n peel - double sided
 

Anyone got any good tips for doing a good quality double sided board?
My current thinking is to drill two large holes in the board
pre-marking and line up the holes with circles in the peel film.


Any tips welcome!
J

Press n peel - double sided
 

On 2006-03-23, Coyoteboy wrote:
Anyone got any good tips for doing a good quality double sided board?

chinese fab houses offer good deals for small runs.

My current thinking is to drill two large holes in the board
pre-marking and line up the holes with circles in the peel film.

I'd use small holes and pins to line it up.

Bye.
Jasen

Press n peel - double sided
 

Jasen Betts fleurde mijn beeldscherm op met hetvolgende:
On 2006-03-23, Coyoteboy wrote:
Anyone got any good tips for doing a good quality double sided
board?

chinese fab houses offer good deals for small runs.

My current thinking is to drill two large holes in the board
pre-marking and line up the holes with circles in the peel film.

I'd use small holes and pins to line it up.

Bye.
Jasen


I place to strips of PCB between the sheets.
They will have the same thickness as the PCB, you can easily hold it
against the light to see if you lined them up correctly.

One thing should be said, this only works fine if you can illuminated
both side of the PCB at the same time.

--


Alexander

_______________________________________
Nationalism is an infantile sickness. It is the measles of the human
race. - Albert Einstein