Mitsubishi Model VS-6017R Anode Cable Placement
 

Can anyone tell me how the three prong anode cable on the mitsubishi model vs-6017r projection tv is suppose to go on the three tubes?

The suction cups go on the sides of the three picture tubes red green and blue

below are the three suction cups
this goes to the flyback

3 2 1 \_/
[=====] [=====] [=====] ]
L_______] [__________][____ _]
this is the red anode cable with the
three suction cups on it.

I need to know the order of the three suction cups that come from the flyback and go to the picture tubes. The [====] represent the suction cups
the \_/ represents the anode cable that goes to the flyback and the [___][___] represents the three prong red anode cable.


I hope you can understand this rough description of my problem and are able to assist me in this.

Maybe this will help as well:
{3}-----{2}-------{1}--------------------{[goes to flyback]}
[______][________][________________________]

above the [____] is the red anode cable
and the {} is the suction cups that go to the tubes
and the {[]} is the end of the anode cable that goes to the flyback



Thanks


Bannio

Basically; With the chassis assembled into the set, run the shortest anode
lead to the closest CPT, then just daisy chain them to the next CPT and so
on.
"bannio" wrote in message
...

Can anyone tell me how the three prong anode cable on the mitsubishi
model vs-6017r projection tv is suppose to go on the three tubes?

The suction cups go on the sides of the three picture tubes red green
and blue

below are the three suction cups
this goes to
the flyback

3 2 1 \_/
[=====] [=====] [=====] ]
L_______] [__________][____ _]
this is the red anode
cable with the
three suction cups on
it.

I need to know the order of the three suction cups that come from the
flyback and go to the picture tubes. The [====] represent the suction
cups
the \_/ represents the anode cable that goes to the flyback and the
[___][___] represents the three prong red anode cable.


I hope you can understand this rough description of my problem and are
able to assist me in this.

Maybe this will help as well:
{3}-----{2}-------{1}--------------------{[goes to flyback]}
[______][________][________________________]

above the [____] is the red anode cable
and the {} is the suction cups that go to the tubes
and the {[]} is the end of the anode cable that goes to the flyback



Thanks


Bannio



--
bannio