Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Daytek DT-77A - Dead
I have a DT-77A Daytek monitor that is dead. The HV tries to come up
but immediately the set shuts down. While its trying to power up it appears for a moment that I have the correct scan derived voltages. Also looks like Q445 had gotten hot but solder connections and testing with analog - check ok. C443 has changed in value, changed part but still no power. I am not familiar with this model nor do I have a schematic diagram. Any help to resolve this problem would be appreciated! Thanks! Ty |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
1 3/8" thick door with dead bolt? | Home Repair | |||
Ever turn a dead leprechaun?!? | Woodturning | |||
Dead Leprechaun Coffins | Woodworking | |||
SmartUPS dead? | Electronics Repair | |||
Dead Mobile | Electronics Repair |