 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
HP 8601A Information Needed
Does anyone have a manual for the HP 8601A RF generator?
I need the resistor values for the RF attenuator section for a friend who toasted his unit. Any help will be greatly appreciated! -- Mike Schultz |
|
#2
|
|||
|
|||
|
Mike,I sent a TIF of page 8-21 attenuator. Let me know if that is what
you need. Manual is large! |
|
#3
|
|||
|
|||
|
Mike:
Tell him before he spends a lot of time on that unit, to check the video amplifier used on the output which drives the attenuator. If it is dead, bad news. Those were EXPENSIVE 30 years ago, when that unit was new, and now are likely unobtanium. But, every 8601 I have seen with a toasted attenuator also has a blown output amplifier. -- Crazy George The attglobal.net address is a SPAM trap. Please change that part to: attdotbiz properly formatted. "Mike Schultz" wrote in message news:ns9Sd.39090$t46.31643@trndny04... Does anyone have a manual for the HP 8601A RF generator? I need the resistor values for the RF attenuator section for a friend who toasted his unit. Any help will be greatly appreciated! -- Mike Schultz |
|
#4
|
|||
|
|||
|
Thanks Lou-that does the trick!
-- Mike Schultz "Lou deGonzague" wrote in message ... Mike,I sent a TIF of page 8-21 attenuator. Let me know if that is what you need. Manual is large! |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FAQ: HAND TOOLS (Repost) | Woodworking | |||
| Windsor Plywood Scam - Saskatoon | Woodworking | |||
| Building a childrens wooden climbing frame - Advice needed | UK diy | |||
| OT - More LED info needed | Metalworking | |||
Linear Mode
