Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Excessive red vertical deflection in CRT monitor?
Hi. I have an iMac G3, with a built in CRT display. Convergence at the
centre is perfect. Horizontal convergence is pretty good right across the screen. Vertical convergence is terrible. The problem is that at the top of the screen, the red beam lands higher than the others, and at the bottom, lower. So simply moving the beams around relative to each other doesn't solve that problem. Is there likely to be an adjustment for this? Purity isn't absolutely 100%, but it's certainly good enough - there are no blotchy or mottled ares on the screen, just a bit of tinge towards some edges. Thanks, Daniele -- Apple Juice Ltd Chapter Arts Centre Market Road www.apple-juice.co.uk Cardiff CF5 1QE 029 2019 0140 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RCA 35" - F35050ST - CTC169BE2 Chassis - Slow Vertical Deflection. | Electronics Repair | |||
IIYAMA Monitor model : S102GT, and DELL P1110, are they the same monitor? | Electronics Repair | |||
Zienth Vertical Squish (How do I find and test the Capacitor?) | Electronics Repair | |||
Big battle with WEIRD vertical deflection problem in PTK195 chassis. | Electronics Repair | |||
Monitor Vert Deflection Problem | Electronics Repair |