 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
CTC 203
One quick question before I dig into it. It powers up, but there is no
power to the filaments. I've removed and cleaned the L14401 and pads, but no go. Any ideas? Thanks. Mark |
|
#2
|
|||
|
|||
|
Did you check the HOT for being Shorted.
Check also the regulator and associated components. kip "Michele Smith" wrote in message .. . One quick question before I dig into it. It powers up, but there is no power to the filaments. I've removed and cleaned the L14401 and pads, but no go. Any ideas? Thanks. Mark |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
