Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
RCA F27202FT chassis CTC169C2
My vertical deflection has collapsed to a 1" line. If you smack it, it will return to normal for brief period of time--i.e. looks like a cold solder joint somewhere. I retouched the toshiba NTSC chip on board but don't really know where all the other vertical components are--if someone could help me narrow down where to head with the trusty soldering iron, I would greatly appreciate it.
TIA! |
#2
|
|||
|
|||
Look for capacitor C4511. It's a axial cap (1 wire out of each end).
One of the larger parts on the main board. Resoldering the connections should fix the set. If not, look on top of the board for glue. Any parts gooped with glue will develop bad connections over time, the glue needs to be removed. Ron |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RCA RPTV: Chassis #PT169PGA Dead!!! | Electronics Repair | |||
ITC222 chassis issues. (COMMON!) | Electronics Repair | |||
Tech Review: Victor's (8liners/Genao) Replacement Arcade RGB Monitor Chassis (LONG) | Electronics Repair | |||
Need Sony Monitor schematic CDM-5021PT | Electronics Repair |