Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Seth Stern
 
Posts: n/a
Default Heath 4221 Oscilloscope

I have a Heath 4221 oscilloscope in need of repairs. This one is
apparently not a Heathkit and appears to have been manufactured in
Japan. Does anyone out there have any suggestions as to where I might
take it (in the San Francisco bay area) or even find a schematic ?
  #2   Report Post  
OZ132HOME
 
Posts: n/a
Default


Seth Stern Wrote:
I have a Heath 4221 oscilloscope in need of repairs. This one is
apparently not a Heathkit and appears to have been manufactured in
Japan. Does anyone out there have any suggestions as to where I might
take it (in the San Francisco bay area) or even find a schematic ?


ME TOO! I have a 4221 which powers on and the CRT heater comes on but
it displays no trace. A schematic would be great.
-Mike OZ in Indiana


--
OZ132HOME
  #3   Report Post  
Michael A. Terrell
 
Posts: n/a
Default

OZ132HOME wrote:

Seth Stern Wrote:
I have a Heath 4221 oscilloscope in need of repairs. This one is
apparently not a Heathkit and appears to have been manufactured in
Japan. Does anyone out there have any suggestions as to where I might
take it (in the San Francisco bay area) or even find a schematic ?


ME TOO! I have a 4221 which powers on and the CRT heater comes on but
it displays no trace. A schematic would be great.
-Mike OZ in Indiana

--
OZ132HOME


Have you tried contacting Heath? They still have a lot of their
manuals and schematics available. http://www.heathkit.com/index.html
--
?

Michael A. Terrell
Central Florida
  #4   Report Post  
Ken Weitzel
 
Posts: n/a
Default



Michael A. Terrell wrote:

OZ132HOME wrote:

Seth Stern Wrote:

I have a Heath 4221 oscilloscope in need of repairs. This one is
apparently not a Heathkit and appears to have been manufactured
in Japan. Does anyone out there have any suggestions as to where
I might take it (in the San Francisco bay area) or even find a
schematic ?


ME TOO! I have a 4221 which powers on and the CRT heater comes on
but it displays no trace. A schematic would be great. -Mike OZ in
Indiana

-- OZ132HOME



Have you tried contacting Heath? They still have a lot of their
manuals and schematics available. http://www.heathkit.com/index.html


Hi...

The exact model number you guys are looking for isn't here, but
4221 is surrounded... (4210 and 4225). Maybe one is close enough
to get you started? Or maybe the owner of the site can help.

Be forewarned though, these aren't freebies, they cost.

http://www.sarrio.com/sarrio/rsman2.html

Take care.

Ken

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tektronix TDS220 oscilloscope startup problem Tony Ferrino Electronics Repair 2 May 9th 07 03:22 AM
searching: schematics for oscilloscope Philips PM3267; can deliver PM3218, PM3632 Gerd Prien Electronics Repair 1 May 12th 05 06:58 PM


All times are GMT +1. The time now is 08:30 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"