Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Help With TV Problem Please
I have a JVC 28" Television - its over 10 years old but still gives a good
picture most of the time. My problem is that on an irregular basis the TV will appear to go into standby (loss of picture and sound) and the power LED goes from bright to dim. A well aimed hard bash on the side will get it working again, sometimes for a month, sometimes for a week or sometimes for a few minutes. When it's working everyting is perfect so I'm assuming I have a dry joint or loose connection rather than a faulty component. Trouble is, when I take the back off it always works and I have been unable to spot the problem area. I'm good with electronics but don't know TVs that well. From my description is there any particular area I should be looking (to narrow my search) or could the fault lie anywhere. Cheers, Nigel |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Surface ground water problem | Home Repair | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Repair | |||
AV problem with philips 32PW6005 | Home Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |