JVC AV2749S No Sound at all,good picture though
I have a JVC AV-2749S, the problem is the audio, and there isn't any sound.
The source power for the TA8200AH IC is fine. The SAMS photo fact power Source [5] say it should be 20.0V, and I'm reading 15.7 at its source. The reading I get at the positive side of the input cap699 just before going into the VCC pin 9 of IC says 15.3V. So with that reading I know I have power at the input without taking a reading at pin 9, for this IC can operate between 10v-37v. There is no static sound like one would normally hear, I mean not even a trackle, faint sound of any kind. All other features and Functions are fine. Meaning the picture is great. I don't have The original remote, but the universal I'm using works all the on-board functions brightness, volume, scan channel and so forth. The only tools I have to work with are a DMM and logic probe. Any input would be excepted and appreciated. Thanks for your time. |
My info says to replace IC631(TDA1256).
|
All times are GMT +1. The time now is 02:41 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter