Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Optiquest Z90 - Q442 blowing
Hi,
I'm having a problem with my Optiquest Z90 monitor - Model# VCDTS21603-1M. Q442 is being blown out almost instantly on power up. Nothing else appears to be wrong. No obvious burned parts, and no loose solder joints that I could find. I traced the leads from Q442 back and tested what I could along that path, everything seemed to check out. I'm wondering if anybody is familiar with this model and could tell me what may cause this, or at least what Q442 does, or can point me to a schematic. I have had zero luck searching for this model online. This is a last ditch effort before I junk the monitor, which would be a shame because otherwise it was a pretty nice one. Thanks in advance |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
A/C not blowing cool air, house not cooling | Home Repair | |||
Rheem 80 plus furnace blowing cold air | Home Repair | |||
swimming pool hoses blowing off | Home Repair |