Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
 
Posts: n/a
Default Yanmaha 735 Skips

I have aYamaha cdc-705 cd changer that skips randomly from one track to
another. It may play 4 minutes of a song and skip or only a minute. I
cleaned the lens but that had no effect. Any help is appreciated.

Thank you.
  #2   Report Post  
 
Posts: n/a
Default

this sounds like a bad laser.

Try Grandata for these, I replaced three so far and no returns yet.
Regards,
-A

  #3   Report Post  
 
Posts: n/a
Default

I checked Grandata and they don't list an assembly for the 705. Most of the
Yamaha's seem to use the KSS210A, do you know if the 705 also uses it?

Thank you
  #4   Report Post  
Mark D. Zacharias
 
Posts: n/a
Default

I'm pretty sure it was the KSS-210. A KSS-212 or KSS-150 would also work.

Mark Z.


wrote in message
news:myQsd.617944$mD.575396@attbi_s02...
I checked Grandata and they don't list an assembly for the 705. Most of the
Yamaha's seem to use the KSS210A, do you know if the 705 also uses it?

Thank you



  #5   Report Post  
Mark D. Zacharias
 
Posts: n/a
Default

P.S.

Don't forget - if you replace the pickup, there is that little solder "blob"
on the pickup pc board which must be unsoldered in order for the new pickup
to function.

Mark Z.


"Mark D. Zacharias" wrote in message
...
I'm pretty sure it was the KSS-210. A KSS-212 or KSS-150 would also work.

Mark Z.





  #6   Report Post  
 
Posts: n/a
Default

It was a KSS-150 which I replaced with a KSS-210A. This fixed the skipping
issue. However, sometimes when attempting to play a CD, it will spin up,
flash DISC and open. If I close the tray it will then play the CD
flawlessly.
  #7   Report Post  
Mark D. Zacharias
 
Posts: n/a
Default

These had some problems with teeth broken out of a plastic gear, as I
recall. The tracking gain was out of whack due to problems with the pickup.
The pickup and gear needed replacement, then adjustments made. I think there
was also a resistor added to the circuit.

Mark Z.


wrote in message
news:0zurd.700719$8_6.227392@attbi_s04...
I have aYamaha cdc-705 cd changer that skips randomly from one track to
another. It may play 4 minutes of a song and skip or only a minute. I
cleaned the lens but that had no effect. Any help is appreciated.

Thank you.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sony DVP-S360 New Laser Still skips, pixel, restarts !!! MikeZOD Electronics Repair 5 June 23rd 04 09:52 AM


All times are GMT +1. The time now is 04:22 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"