Soft on power problem Magnavox 27" Model HD2763 C401
Resoldering AC input circuits and IR, control button, and microprocessor
sections allow the set to power on normally for a few days. Problem seams to be in the standby power supply going down after a while. Any experience, suggestions? TIA |
A common problem with many Magnavox TV's is the 100UF 200V electrolytic
capacitor in the power supply goes bad. It is located near the heatsink that holds the 5-pin STR voltage regulator IC. Very common failure. Hope this helps... John |
All times are GMT +1. The time now is 09:36 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter