Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Looks like I need to replace Q5a1 on the Main-PCB (mitsu PT 260p42002).
Anybody have any info on the part or a substitute. Problem with the set is green tint and retrace lines on the set. Thanks, Hatch |
#2
![]() |
|||
|
|||
![]()
Hmm
well i found the reference in NTE as to what it is. http://www.nteinc.com/specs/300to399/NTE375.html but it spec's it as a vertical output? Hatch wrote: Looks like I need to replace Q5a1 on the Main-PCB (mitsu PT 260p42002). Anybody have any info on the part or a substitute. Problem with the set is green tint and retrace lines on the set. Thanks, Hatch |
#3
![]() |
|||
|
|||
![]()
Thanks,
I found one locally so I should be able to get it in today or tomorrow. Thanks, Hatch "Jamie" wrote in message ... Hmm well i found the reference in NTE as to what it is. http://www.nteinc.com/specs/300to399/NTE375.html but it spec's it as a vertical output? Hatch wrote: Looks like I need to replace Q5a1 on the Main-PCB (mitsu PT 260p42002). Anybody have any info on the part or a substitute. Problem with the set is green tint and retrace lines on the set. Thanks, Hatch |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Surface ground water problem | Home Repair | |||
Boiler Problem Gradually Getting Worse | UK diy | |||
can someone help with a Cable problem? | Electronics Repair |