help needed: Panasonic monitor Panasync E70i 17" monitor
There is no adjustment on the horizontal width, all other controls OK,
monitor looks fine other than that. I have done the cold joints, looked for bad caps, bad active components? Has anyone solve one of these problems before, I fixed a Panasonic not that long agao and it was a bipolar cap in the horizontal, this time the cap is good? |
Problem solved
After eliminating everything, like bad caps bad cold joint, bad active components. I found a resistor which was opened, R707 Brown/Grey/Yellow 180K All is back to normal now. "Aslaner" wrote in message ... There is no adjustment on the horizontal width, all other controls OK, monitor looks fine other than that. I have done the cold joints, looked for bad caps, bad active components? Has anyone solve one of these problems before, I fixed a Panasonic not that long agao and it was a bipolar cap in the horizontal, this time the cap is good? |
All times are GMT +1. The time now is 02:25 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter