DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Need help locating tuner module for Sharp TV (https://www.diybanter.com/electronics-repair/72269-need-help-locating-tuner-module-sharp-tv.html)

Preferred Customer October 6th 04 05:28 PM

Need help locating tuner module for Sharp TV
 
Sharp
Model # - 27N-S50
Serial - 616853
Manufactured Feb. 2000

Need tuner module. The coax connector is broke off. No info on tuner
module. Need part # and/or supplier of modules, if at all possible.

Thanks so much.


Sofie October 6th 04 06:25 PM

A less costly approach would be to re-solder the old connector or a new one.
As long as the pcb is not broken you can carefully solder on a the
connector.... done all the time.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


"Preferred Customer" wrote in message
...
Sharp
Model # - 27N-S50
Serial - 616853
Manufactured Feb. 2000

Need tuner module. The coax connector is broke off. No info on tuner
module. Need part # and/or supplier of modules, if at all possible.

Thanks so much.




JohnAce October 6th 04 07:14 PM

Part number VTUVTST5UF78S about $40 to $60.00.. Better off doing what sofie
says, replace the rf connector

john October 6th 04 07:46 PM

Part number VTUVTST5UF78S about $40 to $60.00.. Better off doing what sofie
says, replace the rf connector

Use the RCA Teflon one it will take the HEAT.

kip



Tom MacIntyre October 6th 04 09:28 PM

On Wed, 6 Oct 2004 14:46:45 -0400, "john"
wrote:

Part number VTUVTST5UF78S about $40 to $60.00.. Better off doing what sofie
says, replace the rf connector

Use the RCA Teflon one it will take the HEAT.

kip


When I was doing this for a living, this was a part number I had
memorized. :-)

Tom

Sofie October 7th 04 12:52 AM

RCA part # 215543
While this Teflon "F" connector is designed especially for TCE television on
board tuners it can be utilized in virtually all tuner module repair jobs
bearing in mind that all or some of the mounting tabs may have to be twisted
off in order to flush mount and solder. Also the center pin tab may be too
wide to fit into most OEM tuner module pcbs so it will have to be filed down
or most of it cut off to allow a short jumper wire to be soldered in place.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


"Tom MacIntyre" wrote in message
...
On Wed, 6 Oct 2004 14:46:45 -0400, "john"
wrote:

Part number VTUVTST5UF78S about $40 to $60.00.. Better off doing what

sofie
says, replace the rf connector

Use the RCA Teflon one it will take the HEAT.

kip


When I was doing this for a living, this was a part number I had
memorized. :-)

Tom





All times are GMT +1. The time now is 04:12 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter