I need schematic diagram for a 1412sl Packard Bell Monitor, any help
would be apreciated

Thx
Sagus

"Sagus" wrote in message
om...
I need schematic diagram for a 1412sl Packard Bell Monitor, any help
would be apreciated

Thx
Sagus


First you need to figure out who made the monitor, Packard Bell is just a
junk computer manufacture who slaps their name on whatever monitor they
could get at the cheapest price that week. What's wrong with the monitor? If
the problem is severe enough to require a schematic I would just recycle the
thing, the 1412 is a tiny 14" monitor isn't it?

This outfit appears to sell the schematics you need:

http://www.electronix.com/catalog/de...Path/12_49_201

BTW, do you have the speakers which attach to the sides of the monitor? I
just picked up a used monitor w/ the speakers, but no ac/dc adapter for
the speakers. The polarity needed is indicated on the underside of one of
the speakers, but not the voltage or mill-amperage rating. Can you
assist?

Robert

This outfit appears to sell the schematics you need:

http://www.electronix.com/catalog/de...Path/12_49_201

BTW, do you have the speakers which attach to the sides of the monitor? I
just picked up a used monitor w/ the speakers, but no ac/dc adapter for
the speakers. The polarity needed is indicated on the underside of one of
the speakers, but not the voltage or mill-amperage rating. Can you
assist?

Robert


I have two sets of these...both with the original PB wall-wart. Both
wall-warts are marked "output 9 VDC at 1 Amp."

p a w e b e r 0 2 @ a o l . c o m

webpa

Speaker info....Thanks very much!

Robert