Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
KV-27TS27 brighter images trouble, Please help
I would like to know if you can help me whit this issue.
I'm going to explain the failure clearly so you can imagine which is the problem. I have a KV-27TS27 TV Set, I recently repaired it from the power supply. Everything is working fine except when the TV set tunes a brighter image. When it happens, there's a loud hum in sound and the edges of the image were wiped. When the image changes to a darker scene the failure ends, an so on and on, (only whit brighter images). I have noted that even in darker images or scenes the edges of these images were slightly wiped. Which is the cause of this failure? Is there any aged components such as electrolytic caps causing the trouble? In which part of the TV set can I start to look for the trouble? What can I do to fix it? Please help me, I will be very grateful about your help. |
#2
|
|||
|
|||
I don't know that model but if you can find an agc pot somewhere in that
television you might try to turn it and see what happens, you can't really hurt anything by trying that. AGC stands for automatic gain control. "Blu3b3rrY" wrote in message om... I would like to know if you can help me whit this issue. I'm going to explain the failure clearly so you can imagine which is the problem. I have a KV-27TS27 TV Set, I recently repaired it from the power supply. Everything is working fine except when the TV set tunes a brighter image. When it happens, there's a loud hum in sound and the edges of the image were wiped. When the image changes to a darker scene the failure ends, an so on and on, (only whit brighter images). I have noted that even in darker images or scenes the edges of these images were slightly wiped. Which is the cause of this failure? Is there any aged components such as electrolytic caps causing the trouble? In which part of the TV set can I start to look for the trouble? What can I do to fix it? Please help me, I will be very grateful about your help. |
#3
|
|||
|
|||
"Blu3b3rrY" wrote in message om... I would like to know if you can help me whit this issue. I'm going to explain the failure clearly so you can imagine which is the problem. I have a KV-27TS27 TV Set, I recently repaired it from the power supply. Everything is working fine except when the TV set tunes a brighter image. When it happens, there's a loud hum in sound and the edges of the image were wiped. When the image changes to a darker scene the failure ends, an so on and on, (only whit brighter images). I have noted that even in darker images or scenes the edges of these images were slightly wiped. Which is the cause of this failure? Is there any aged components such as electrolytic caps causing the trouble? In which part of the TV set can I start to look for the trouble? What can I do to fix it? Please help me, I will be very grateful about your help. By "wiped" do you mean underscanning (as in blank/missing edges), tearing or blooming? In all these cases, I would suspect you still have a defect in the power supply, especially since you're also having audio probs. Exactly how did you repair the power supply? What part(s) was/were bad? Are you certain you correctly oriented the parts you replaced (e.g., cap terminals)? |
#4
|
|||
|
|||
Blu3b3rrY wrote:
I would like to know if you can help me whit this issue. I'm going to explain the failure clearly so you can imagine which is the problem. I have a KV-27TS27 TV Set, I recently repaired it from the power supply. Everything is working fine except when the TV set tunes a brighter image. When it happens, there's a loud hum in sound and the edges of the image were wiped. When the image changes to a darker scene the failure ends, an so on and on, (only whit brighter images). I have noted that even in darker images or scenes the edges of these images were slightly wiped. Which is the cause of this failure? Is there any aged components such as electrolytic caps causing the trouble? In which part of the TV set can I start to look for the trouble? What can I do to fix it? Please help me, I will be very grateful about your help. I've noticed the same thing on multiple perfectly fine TV sets connected to cable TV service.Sometimes only on certain channels. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Images Posted of Greene & Greene Furniture Project | Woodworking | |||
Images of Greene & Greene project - in progress | Woodworking |