Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
JVC NV-55BX4 will not power up with convergence power plugged in.
The power LED is bi-color red and green.
Plug TV in, LED comes on red steady. Press power remote or projector tv itself, tries to power up but LED stays red and modulates brightness of LED raqidly for a then stops and stays solid red. Unplug the power plug for convergence board mounted in front panel, plug is four of voltages (two volts, two sets of positive and minus voltages for the convergence section, I restate; have that unplugged will allow projector to start up normally. Changed all 3 amps STK4274 ICs and checked for shorts. Nothing found yet. Seen this before? Cheers, Wizard |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Quality Of Tools | UK diy | |||
need help tracing power circuit on laptop | Electronics Repair | |||
Can power supply rebuild kit save this VCR? | Electronics Repair | |||
Power cost of idle electric water heater | Home Ownership | |||
Computer power supply compatiility | Electronics Repair |