DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Free Ampex A692 mono tube amp (https://www.diybanter.com/electronics-repair/619583-free-ampex-a692-mono-tube-amp.html)

John-Del[_2_] September 24th 18 07:03 PM

Free Ampex A692 mono tube amp
 
Running condition unknown except for the following: a long hard wired AC cord was added to supplement the side AC receptacle which is still there, but the AC cord has no plug (looks like it was wire-nutted into an even longer cord). Two of the three knobs are missing. It's never been stored in a wet or unheated area.

The push pull 6V6s and the rectifier are RCA all dated late 1957 and I believe them to be original to the amp. The 12AU7 and EF86 are missing, so it's untested.

Other than the two missing signal tubes and knobs, it's complete.

I will box it, but won't ship it. If you want it, you must issue a pick up at my business location.

Email me at: delstv--AT-- A O L.c o m

philo September 24th 18 10:22 PM

Free Ampex A692 mono tube amp
 
On 09/24/2018 01:03 PM, John-Del wrote:
Running condition unknown except for the following: a long hard wired AC cord was added to supplement the side AC receptacle which is still there, but the AC cord has no plug (looks like it was wire-nutted into an even longer cord). Two of the three knobs are missing. It's never been stored in a wet or unheated area.

The push pull 6V6s and the rectifier are RCA all dated late 1957 and I believe them to be original to the amp. The 12AU7 and EF86 are missing, so it's untested.

Other than the two missing signal tubes and knobs, it's complete.

I will box it, but won't ship it. If you want it, you must issue a pick up at my business location.

Email me at: delstv--AT-- A O L.c o m




Don't want it but I think you should mention your city

John-Del[_2_] September 24th 18 10:53 PM

Free Ampex A692 mono tube amp
 
On Monday, September 24, 2018 at 5:22:58 PM UTC-4, philo wrote:
On 09/24/2018 01:03 PM, John-Del wrote:
Running condition unknown except for the following: a long hard wired AC cord was added to supplement the side AC receptacle which is still there, but the AC cord has no plug (looks like it was wire-nutted into an even longer cord). Two of the three knobs are missing. It's never been stored in a wet or unheated area.

The push pull 6V6s and the rectifier are RCA all dated late 1957 and I believe them to be original to the amp. The 12AU7 and EF86 are missing, so it's untested.

Other than the two missing signal tubes and knobs, it's complete.

I will box it, but won't ship it. If you want it, you must issue a pick up at my business location.

Email me at: delstv--AT-- A O L.c o m




Don't want it but I think you should mention your city.



Good point. Shipped from Waterbury, CT 06706-2002.

John-Del[_2_] September 25th 18 08:21 PM

Free Ampex A692 mono tube amp
 
On Monday, September 24, 2018 at 2:03:03 PM UTC-4, John-Del wrote:
Running condition unknown except for the following: a long hard wired AC cord was added to supplement the side AC receptacle which is still there, but the AC cord has no plug (looks like it was wire-nutted into an even longer cord). Two of the three knobs are missing. It's never been stored in a wet or unheated area.

The push pull 6V6s and the rectifier are RCA all dated late 1957 and I believe them to be original to the amp. The 12AU7 and EF86 are missing, so it's untested.

Other than the two missing signal tubes and knobs, it's complete.

I will box it, but won't ship it. If you want it, you must issue a pick up at my business location.

Email me at: delstv--AT-- A O L.c o m



Taken.


All times are GMT +1. The time now is 11:21 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter