 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
TeK TDS420A
I have a TDS420A oscilloscope and the BNC connectors wear out. I can not
use a normal wench to take it out because the area is too tight. I am wondering if this application need a special wench which is only supply by Tektronix. If yes, can I have the part number for the wench? thanks Eric |
|
#2
|
|||
|
|||
|
TeK TDS420A
http://www.tek.com/ "Eric" wrote in message ... I have a TDS420A oscilloscope and the BNC connectors wear out. I can not use a normal wench to take it out because the area is too tight. I am wondering if this application need a special wench which is only supply by Tektronix. If yes, can I have the part number for the wench? thanks Eric |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
