Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Jiri Kuukasjärvi
 
Posts: n/a
Default Canon XM1 (GL1) digital camcorder repair

Hi!

My friend brought me this camcorder with following problem description:
* First the picture on the LCD screen on the side disappeared
* the view finder worked, but camera could turn off any moment
* Then it died completely. No picture, no sound, no lights.

Now, I opened the camera and noticed that one of the wires going to the
LCD screen was broken, and someone had repaired it before. But the
soldering didn´t last, and so the wire was free again. I resoldered it,
and checked for fuses.. I´m not sure, but I think there are three fuses
on that small pcb to wich power cable from battery compartment connects
to. The suspected components were marked as FUxxxx, and were little
black smd components, maybe 4x5mm in size. "30" marked on top.
Are these fuses?
Any other parts that might have gone bad enough to kill the camera
completely?

TIA!

- Jiri K.

  #2   Report Post  
Jiri Kuukasjärvi
 
Posts: n/a
Default Canon XM1 (GL1) digital camcorder repair

Jiri Kuukasjärvi wrote:

Hi!

My friend brought me this camcorder with following problem description:
* First the picture on the LCD screen on the side disappeared
* the view finder worked, but camera could turn off any moment
* Then it died completely. No picture, no sound, no lights.

Now, I opened the camera and noticed that one of the wires going to the
LCD screen was broken, and someone had repaired it before. But the
soldering didn´t last, and so the wire was free again. I resoldered it,
and checked for fuses.. I´m not sure, but I think there are three fuses
on that small pcb to wich power cable from battery compartment connects
to. The suspected components were marked as FUxxxx, and were little
black smd components, maybe 4x5mm in size. "30" marked on top.
Are these fuses?
Any other parts that might have gone bad enough to kill the camera
completely?

TIA!

- Jiri K.


Small update:
The components that I suspect are marked FU3201 - FU3203.
I did some measuring, and one of them (FU3201) is definately broken.
It´s resistance is ~30k, while the others are at 0,7ohm.
These small, black components are 3.4mm long, 2.5mm wide and 2.2mm high.

What are they? What values?

- Jiri K.
Remove XX from the address if replying directly to me.

  #3   Report Post  
Jiri Kuukasjärvi
 
Posts: n/a
Default Canon XM1 (GL1) digital camcorder repair

Jiri Kuukasjärvi wrote:

Hi!

My friend brought me this camcorder with following problem description:
* First the picture on the LCD screen on the side disappeared
* the view finder worked, but camera could turn off any moment
* Then it died completely. No picture, no sound, no lights.

Now, I opened the camera and noticed that one of the wires going to the
LCD screen was broken, and someone had repaired it before. But the
soldering didn´t last, and so the wire was free again. I resoldered it,
and checked for fuses.. I´m not sure, but I think there are three fuses
on that small pcb to wich power cable from battery compartment connects
to. The suspected components were marked as FUxxxx, and were little
black smd components, maybe 4x5mm in size. "30" marked on top.
Are these fuses?
Any other parts that might have gone bad enough to kill the camera
completely?

TIA!

- Jiri K.


Small update:
The components that I suspect are marked FU3201 - FU3203.
I did some measuring, and one of them (FU3201) is definately broken.
It´s resistance is ~30k, while the others are at 0,7ohm.
These small, black components are 3.4mm long, 2.5mm wide and 2.2mm high.

What are they? What values?

- Jiri K.
Remove XX from the address if replying directly to me.

  #4   Report Post  
johnnie7
 
Posts: n/a
Default Canon XM1 (GL1) digital camcorder repair

could be a fuse



"Jiri Kuukasjärvi" wrote in message
...
Jiri Kuukasjärvi wrote:

Hi!

My friend brought me this camcorder with following problem

description:
* First the picture on the LCD screen on the side disappeared
* the view finder worked, but camera could turn off any moment
* Then it died completely. No picture, no sound, no lights.

Now, I opened the camera and noticed that one of the wires going to the
LCD screen was broken, and someone had repaired it before. But the
soldering didn´t last, and so the wire was free again. I resoldered it,
and checked for fuses.. I´m not sure, but I think there are three fuses
on that small pcb to wich power cable from battery compartment connects
to. The suspected components were marked as FUxxxx, and were little
black smd components, maybe 4x5mm in size. "30" marked on top.
Are these fuses?
Any other parts that might have gone bad enough to kill the camera
completely?

TIA!

- Jiri K.


Small update:
The components that I suspect are marked FU3201 - FU3203.
I did some measuring, and one of them (FU3201) is definately broken.
It´s resistance is ~30k, while the others are at 0,7ohm.
These small, black components are 3.4mm long, 2.5mm wide and 2.2mm high.

What are they? What values?

- Jiri K.
Remove XX from the address if replying directly to me.



  #5   Report Post  
johnnie7
 
Posts: n/a
Default Canon XM1 (GL1) digital camcorder repair

could be a fuse



"Jiri Kuukasjärvi" wrote in message
...
Jiri Kuukasjärvi wrote:

Hi!

My friend brought me this camcorder with following problem

description:
* First the picture on the LCD screen on the side disappeared
* the view finder worked, but camera could turn off any moment
* Then it died completely. No picture, no sound, no lights.

Now, I opened the camera and noticed that one of the wires going to the
LCD screen was broken, and someone had repaired it before. But the
soldering didn´t last, and so the wire was free again. I resoldered it,
and checked for fuses.. I´m not sure, but I think there are three fuses
on that small pcb to wich power cable from battery compartment connects
to. The suspected components were marked as FUxxxx, and were little
black smd components, maybe 4x5mm in size. "30" marked on top.
Are these fuses?
Any other parts that might have gone bad enough to kill the camera
completely?

TIA!

- Jiri K.


Small update:
The components that I suspect are marked FU3201 - FU3203.
I did some measuring, and one of them (FU3201) is definately broken.
It´s resistance is ~30k, while the others are at 0,7ohm.
These small, black components are 3.4mm long, 2.5mm wide and 2.2mm high.

What are they? What values?

- Jiri K.
Remove XX from the address if replying directly to me.





  #6   Report Post  
Junior Member
 
Posts: 1
Default


Could you repair you're camera?
I can confirm that is is a fuse. I need those 3 but i do'nt no where to buy them. I even do'nt no where they are located at the camera i'm using. It's the MV-20i.

I know you're posting is a long time ago but maybe you can remember.

Thanks.

Floris
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Digital Camera DIY repair How to? Steve Electronics Repair 12 December 4th 03 05:09 PM


All times are GMT +1. The time now is 11:56 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"