the monitor shutdown about 3 sec after i turn it on
i found that i have to replace the power board. All 3 $$$
need help to fix this

If you are not experienced with troubleshooting complex SMPS supplies
without any available schematic and usually custom ic's with no datasheets
available, your option is to buy and replace the power board. These things
are designed to be board level repair, virtually no schematics are available
for anything inside the box except for block diagrams of the boards. Some
manufactures will provide the power supply schematic, but not always.

David

"andrew" wrote in message
. ..
the monitor shutdown about 3 sec after i turn it on
i found that i have to replace the power board. All 3 $$$
need help to fix this

News flash...Dated Feb 4, 2004

Pioneer to acquire NEC Plasma Display business.
Read about it here
http://www.nec.co.jp/press/en/0402/0302.html

For Authorized Servicers go he
http://www.necvisualsystems.com/


Good Luck,
Bill Jr



"David" wrote in message
...
If you are not experienced with troubleshooting complex SMPS supplies
without any available schematic and usually custom ic's with no datasheets
available, your option is to buy and replace the power board. These
things
are designed to be board level repair, virtually no schematics are
available
for anything inside the box except for block diagrams of the boards. Some
manufactures will provide the power supply schematic, but not always.

David

"andrew" wrote in message
. ..
the monitor shutdown about 3 sec after i turn it on
i found that i have to replace the power board. All 3 $$$
need help to fix this

Hopefully they pick up the suport for older items rather than starting just
at date of aquisition like most companies.
"Bill Jr" wrote in message
m...
News flash...Dated Feb 4, 2004

Pioneer to acquire NEC Plasma Display business.
Read about it here
http://www.nec.co.jp/press/en/0402/0302.html

For Authorized Servicers go he
http://www.necvisualsystems.com/


Good Luck,
Bill Jr



"David" wrote in message
...
If you are not experienced with troubleshooting complex SMPS supplies
without any available schematic and usually custom ic's with no
datasheets
available, your option is to buy and replace the power board. These
things
are designed to be board level repair, virtually no schematics are
available
for anything inside the box except for block diagrams of the boards.
Some
manufactures will provide the power supply schematic, but not always.

David

"andrew" wrote in message
. ..
the monitor shutdown about 3 sec after i turn it on
i found that i have to replace the power board. All 3 $$$
need help to fix this

Did you had any luck repairing the monitor?
I have the same problem now and I want to know how to fix it NEC
PX-42VP1A
Thanks in advance