Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Fisher CA-283
I am working on a Fisher CA-283 amplifier, without a diagram. I have
repaired the problem of the channels intermittently dropping out, and now have one problem left to solve: when you select Video Aux, and then select tape monitor for inputs, the LED for Video Aux stays lit, even though you have tape monitor selected (it is lit also). There must be a chip on the unit that is defective that is causing this combination. Anyone have any ideas of which chip it is? Any pointers appreciated. Thanks in advance. Mike |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
12 KVA Fisher Panda genset and 10kw 3 phase electric motor | UK diy | |||
Fisher 500-TX schematic? | Electronics Repair | |||
Fisher cassette heads | Electronics Repair |