PLayStation ll
 

Workin on a PS2 that was knocked off a table with about 2 ft drop on
linoleum, only damage was the cd tray front cover broke off, but it still
functioned, Owner thought he could work on it himself, I noticed that the
reset/eject ribbon cable had been pretty mangled, and all I did was to
re-align the laser focus, had it opened and spread apart on bench and played
like 6-7 DVD's on it solid with no prob. In re-assembling it after I was
confident in it, the ribbon cable finally gave out as I was putting the lid
on it, well ordered a new one, put it in, tryed to power it up and now I get
nothing, p-supply out voltages seem norm, but yet its "dead in the water",
no lights,eject,video
there a SMD fuse or a reset button hidden somewhere???
TIA!!




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

PLayStation ll
 

yep.

There is a BAxxxx IC that typically overheats if removed from its heatsink
and it knockes out a chip fuse with a "50 marked on it.

PS11. check it. it might be open. if it is, the BA IC next to it is your
trouble, there is also a ton more on there. Check all chip fuses that have
an arrow pointing to them labled PSxx, those are fuses.




"WickBros" wrote in message
...
Workin on a PS2 that was knocked off a table with about 2 ft drop on
linoleum, only damage was the cd tray front cover broke off, but it still
functioned, Owner thought he could work on it himself, I noticed that the
reset/eject ribbon cable had been pretty mangled, and all I did was to
re-align the laser focus, had it opened and spread apart on bench and
played
like 6-7 DVD's on it solid with no prob. In re-assembling it after I was
confident in it, the ribbon cable finally gave out as I was putting the
lid
on it, well ordered a new one, put it in, tryed to power it up and now I
get
nothing, p-supply out voltages seem norm, but yet its "dead in the water",
no lights,eject,video
there a SMD fuse or a reset button hidden somewhere???
TIA!!




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

PLayStation ll
 

A?, Are you sure that you have the ribbon cable inserted correctly on both
ends.

JC
"WickBros" wrote in message
...
Workin on a PS2 that was knocked off a table with about 2 ft drop on
linoleum, only damage was the cd tray front cover broke off, but it still
functioned, Owner thought he could work on it himself, I noticed that the
reset/eject ribbon cable had been pretty mangled, and all I did was to
re-align the laser focus, had it opened and spread apart on bench and
played
like 6-7 DVD's on it solid with no prob. In re-assembling it after I was
confident in it, the ribbon cable finally gave out as I was putting the
lid
on it, well ordered a new one, put it in, tryed to power it up and now I
get
nothing, p-supply out voltages seem norm, but yet its "dead in the water",
no lights,eject,video
there a SMD fuse or a reset button hidden somewhere???
TIA!!




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

PLayStation ll
 

yea, check that too



"JOHN CARR" wrote in message
...
A?, Are you sure that you have the ribbon cable inserted correctly on both
ends.

JC
"WickBros" wrote in message
...
Workin on a PS2 that was knocked off a table with about 2 ft drop on
linoleum, only damage was the cd tray front cover broke off, but it
still
functioned, Owner thought he could work on it himself, I noticed that
the
reset/eject ribbon cable had been pretty mangled, and all I did was to
re-align the laser focus, had it opened and spread apart on bench and
played
like 6-7 DVD's on it solid with no prob. In re-assembling it after I was
confident in it, the ribbon cable finally gave out as I was putting the
lid
on it, well ordered a new one, put it in, tryed to power it up and now I
get
nothing, p-supply out voltages seem norm, but yet its "dead in the
water",
no lights,eject,video
there a SMD fuse or a reset button hidden somewhere???
TIA!!




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

PLayStation ll
 

Mike, John,
thank both you'se guys very much, yes, my first obvious oversight was the
ribbon too, I had checked that, but I'm gonna check out the other stuff
tomorrow, again, much thanx!




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----