how to sharpen mini dike cutters, nipper cutters?
I have used a very thin file to touch up these tools . it takes a bit of
skill to hold the file steady but it can be done . If you can set the tool in a vice you can also use a dremel tool with a cut off wheel . The cut off wheel is super thin but once again it takes good skill to set the spinning wheel on the blade & get it streight . Dont draw the wheel across the blade .. lay it fully on the blade and hold it so it does the entire blade edge in one shot . |
All times are GMT +1. The time now is 02:05 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter