Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
JBL sub PSW-D110 hums, and the fuse is blown
Hi,
I have a JBL subwoofer modeled PSW-D110 and the fuse is blown. if I replace the fuse, it hums. There are several components seem blown. One of the cap is blown, can't read the value of the cap(C24). Does anyone know the value of the cap. Does anyone have the schematic for this sub? please send it to me if you have it. I read it on the forum that it could be the s53ami causing this problem. Can some confirm this, because I don't want to spend the money to buy the part if this is not the problem. Your help will be greatly appreciated. Thanks. please also send me the schematic for the s531mi component if you have it. |
#2
|
|||
|
|||
JBL sub PSW-D110 hums, and the fuse is blown
In addition to the amp modules - the main filter caps often open up on
these, and the smaller cap you mentioned is a 10uF at 50V bipolar capacitor. JBL says these need to be upgraded to 100V. Sometimes resoldering the module fixes these. Mark Z. "Sathees" wrote in message om... Hi, I have a JBL subwoofer modeled PSW-D110 and the fuse is blown. if I replace the fuse, it hums. There are several components seem blown. One of the cap is blown, can't read the value of the cap(C24). Does anyone know the value of the cap. Does anyone have the schematic for this sub? please send it to me if you have it. I read it on the forum that it could be the s53ami causing this problem. Can some confirm this, because I don't want to spend the money to buy the part if this is not the problem. Your help will be greatly appreciated. Thanks. please also send me the schematic for the s531mi component if you have it. |
#3
|
|||
|
|||
JBL sub PSW-D110 hums, and the fuse is blown
Which is the filtering capacitor? Do you have the schematic for this sub?
"Mark D. Zacharias" wrote in message link.net... In addition to the amp modules - the main filter caps often open up on these, and the smaller cap you mentioned is a 10uF at 50V bipolar capacitor. JBL says these need to be upgraded to 100V. Sometimes resoldering the module fixes these. Mark Z. "Sathees" wrote in message om... Hi, I have a JBL subwoofer modeled PSW-D110 and the fuse is blown. if I replace the fuse, it hums. There are several components seem blown. One of the cap is blown, can't read the value of the cap(C24). Does anyone know the value of the cap. Does anyone have the schematic for this sub? please send it to me if you have it. I read it on the forum that it could be the s53ami causing this problem. Can some confirm this, because I don't want to spend the money to buy the part if this is not the problem. Your help will be greatly appreciated. Thanks. please also send me the schematic for the s531mi component if you have it. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|