The first thing to do is clean & lube the
mode switch. Carefull of the mechanism
timing. Now, maybe the front buttons
aren't working. look for a "stuck" switch.
Turbo.

"Turbo" wrote in message ...
The first thing to do is clean & lube the
mode switch. Carefull of the mechanism
timing. Now, maybe the front buttons
aren't working. look for a "stuck" switch.
Turbo.

Interestingly... After I got to looking into the unit and studying it.
I noticed that the rubber pinch roller along with its steel drive
roller were quite dirty. So I buffed and cleaned them really well. I
cleaned the surface of the video drum real well too. After doing all
of this everything started working. I'm not exactly sure if this was
what did it or if it was the removal of the chassis and its reseating
into the control board that did the trick... but whatever it was it
works fine now.

Thank you for your interest Turbo!