Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
Been working on an Italian FBT powered speaker and wondering what the tiny
non-via vias were , connected by the finest of traces, so minimal current. They must be the "components" all over the power amp page of the Maxx 9 amp , uploaded as Max 9 to Elektrotanya, as some sort of distributed capacitance , inside the board. What is the generic name for this pcb production technique , presumably requiring an intermediary plane but not really multi-layer pcb, and any advantage in design or realibility of amps ? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Piezo capacitance | Electronic Schematics | |||
End-to-End Capacitance of SMD Resistors | Electronic Schematics | |||
Telecommunications Alternatives For The Distributed Workforce (March 2006) | UK diy | |||
Car capacitance | Metalworking |