To go along with previous post about LG Optimus Damaged PCB
Heres the photo link of the damaged PCB in question. Notice the upper
right side behind charger port. Ive already removed the burned out diode and laid it along the power rail in the photo. What are the components near to that area and can I bridge anything to get it back working again? photo link is http://www.flickr.com/#/photos/77872404@N08 |
To go along with previous post about LG Optimus Damaged PCB
On 3/10/2012 1:47 AM, Rude Co. wrote:
Heres the photo link of the damaged PCB in question. Notice the upper right side behind charger port. Ive already removed the burned out diode and laid it along the power rail in the photo. What are the components near to that area and can I bridge anything to get it back working again? photo link is http://www.flickr.com/#/photos/77872404@N08 I am not going to sign up to Flicker just to see you picture. The diode did not commit suicide. It died because something further on in the circuit killed it. The diode was a sacrificial component to stop an actual fire from starting. You won't gain anything by replacing the diode without first determining what caused the death and repairing that. Paul |
To go along with previous post about LG Optimus Damaged PCB
|
To go along with previous post about LG Optimus Damaged PCB
Rude Co. wrote: Heres the photo link of the damaged PCB in question. Notice the upper right side behind charger port. Ive already removed the burned out diode and laid it along the power rail in the photo. What are the components near to that area and can I bridge anything to get it back working again? photo link is http://www.flickr.com/#/photos/77872404@N08 correction...... photo is located at http://www.flickr.com/photos/rudeco, sorry for the mishap. |
To go along with previous post about LG Optimus Damaged PCB
On Sat, 10 Mar 2012 12:11:16 -0800 (PST), "Rude Co."
put finger to keyboard and composed: Rude Co. wrote: Heres the photo link of the damaged PCB in question. Notice the upper right side behind charger port. Ive already removed the burned out diode and laid it along the power rail in the photo. What are the components near to that area and can I bridge anything to get it back working again? photo link is http://www.flickr.com/#/photos/77872404@N08 correction...... photo is located at http://www.flickr.com/photos/rudeco, sorry for the mishap. Here is a direct link to your photo (no ads, banners, popups, etc): http://farm8.staticflickr.com/7040/6...c9554088_b.jpg Unfortunately I can't make out any of the part markings. :-( If your camera doesn't have a macro function, then sometimes a scan will produce a better result. Otherwise, can you determine where the diode's pads connect to? In particular, which pins of the charger port, if any, connect to the diode? Your "charger port" looks like a micro-USB socket: http://pinoutsguide.com/Slots/USB_pinout.shtml http://pinouts.ru/CellularPhones-A-N...b_pinout.shtml - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
To go along with previous post about LG Optimus Damaged PCB
Franc Zabkar wrote in message
... On Sat, 10 Mar 2012 12:11:16 -0800 (PST), "Rude Co." put finger to keyboard and composed: Rude Co. wrote: Heres the photo link of the damaged PCB in question. Notice the upper right side behind charger port. Ive already removed the burned out diode and laid it along the power rail in the photo. What are the components near to that area and can I bridge anything to get it back working again? photo link is http://www.flickr.com/#/photos/77872404@N08 correction...... photo is located at http://www.flickr.com/photos/rudeco, sorry for the mishap. Here is a direct link to your photo (no ads, banners, popups, etc): http://farm8.staticflickr.com/7040/6...c9554088_b.jpg Unfortunately I can't make out any of the part markings. If your camera doesn't have a macro function, then sometimes a scan will produce a better result. Otherwise, can you determine where the diode's pads connect to? In particular, which pins of the charger port, if any, connect to the diode? Your "charger port" looks like a micro-USB socket: http://pinoutsguide.com/Slots/USB_pinout.shtml http://pinouts.ru/CellularPhones-A-N...b_pinout.shtml - Franc Zabkar -- Please remove one 'i' from my address when replying by email. Or use a magnifying glass and spacer tube and a few test shots to get to know the focus range. |
To go along with previous post about LG Optimus Damaged PCB
I'll second that - sometimes simply laying objects onto the bed of a scanner
can produce excellent results. Gareth. "Franc Zabkar" wrote in message ... On Sat, 10 Mar 2012 12:11:16 -0800 (PST), "Rude Co." put finger to keyboard and composed: Rude Co. wrote: Heres the photo link of the damaged PCB in question. Notice the upper right side behind charger port. Ive already removed the burned out diode and laid it along the power rail in the photo. What are the components near to that area and can I bridge anything to get it back working again? photo link is http://www.flickr.com/#/photos/77872404@N08 correction...... photo is located at http://www.flickr.com/photos/rudeco, sorry for the mishap. Here is a direct link to your photo (no ads, banners, popups, etc): http://farm8.staticflickr.com/7040/6...c9554088_b.jpg Unfortunately I can't make out any of the part markings. :-( If your camera doesn't have a macro function, then sometimes a scan will produce a better result. Otherwise, can you determine where the diode's pads connect to? In particular, which pins of the charger port, if any, connect to the diode? Your "charger port" looks like a micro-USB socket: http://pinoutsguide.com/Slots/USB_pinout.shtml http://pinouts.ru/CellularPhones-A-N...b_pinout.shtml - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
All times are GMT +1. The time now is 11:32 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter