Hi!
I need to know the draw # for a flyback transformer for an RCA Chassis
CTC203AAA9.
Thank yoy
Vince

On Jun 18, 3:36*pm, "Vince Schmitt" wrote:
Hi!
I need to know the draw # for a flyback transformer *for an RCA Chassis
CTC203AAA9.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * Thank yoy
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *Vince

What do you mean "the draw"

Do you mean a schematic showing the windings and terminal numbers, or
the current levels going through the transformer when the TV is
operating????

On Jun 18, 4:36*pm, "Vince Schmitt" wrote:
Hi!
I need to know the draw # for a flyback transformer *for an RCA Chassis
CTC203AAA9.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * Thank yoy
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *Vince



Database shows part number 244229 for your chassis version, but TCE
TVs have had issues with the numbers on the original fly needing to be
researched. Do you have the original and are the numbers legible?

John

On Sun, 19 Jun 2011 16:16:37 -0700 (PDT), John-Del
put finger to keyboard and composed:

On Jun 18, 4:36*pm, "Vince Schmitt" wrote:
Hi!
I need to know the draw # for a flyback transformer *for an RCA Chassis
CTC203AAA9.

Database shows part number 244229 for your chassis version ...

FYI, here is a HR Diemen substitute:
http://www.hrdiemen.es/products/inde...rca&offset=240

Unfortunately its information URL gives me an "internal server error":
http://www.hrdiemen.es/products/inde...roduct&id=7313

It usually has a winding diagram with voltage information.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

On Jun 19, 7:16*pm, John-Del wrote:
On Jun 18, 4:36*pm, "Vince Schmitt" wrote:

Hi!
I need to know the draw # for a flyback transformer *for an RCA Chassis
CTC203AAA9.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * Thank yoy
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *Vince

Database shows part number 244229 for your chassis version, but TCE
TVs have had issues with the numbers on the original fly needing to be
researched. *Do you have the original and are the numbers legible?

John

An older RCA part program (back when RCA was actually a viable
company) shows a DRAWING number (the number actually on the fly) of
XX15361-19A That number is only useful if you're scrounging for a
used one as RCA didn't put the actual part number on the parts because
they were subject to upgrades with new part numbers. The old program
also agrees that 244229 is the correct PART number, and it's NLA.
Various subs work, but sometimes have issues with geometry or ABL or
pix tearing problems. I've never used an H.R. in this chassis, but if
their sub is typical of other H.R.s I've used, I wouldn't be afraid of
it.

John