Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Roksan Kandy LIII amp , 2 years old
Owner has seen this thread
http://community.whathifi.com/forums/t/313192.aspx and would rather I looked at it rather than the maker Easy to blame PbF as printed all over as such. Problem is different to that above thread. For ages now the R ch has failed occassionally at switch on. Switch off and most of the time it comes up. Very rarely that ch dies in use, Then last week both ch failed at sw on , so he decided something needed doing Anyone know how to find mechanical data on 16 amp output relays Make Finder 40.615 , clear cased so can see the contact gaps About .75mm for the R one and .5mm or so for the L. Thinking fine contact contamination and not enough mechanical punch-through. Both relays in series from one supply and TA3717 ptotector IC Or any other ideas other than checking phones socket, if wired in to affect output somehow, PbF solder looks fine. Wanging with engraver and nylon bolt has only highlighted a microphonic capacitor. Looks like another amp where I'll make an LED mod that the owner can view through the phones socket. Bring out pcb mounted, relays-on LED ,and add a different colour one for the main rails supplies on, both viewable through the phones socket transparent plastic panel at its rear |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Why Didn't I Buy This Years Ago!? | Woodworking | |||
10 Years Later | Metalworking | |||
100 Years of E=mc2 | Electronics | |||
What is it? LIII | Metalworking | |||
What is it? LIII | Woodworking |