Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,040
Default Pet hates ?

In article ,
David Nebenzahl wrote:

On 1/21/2011 5:43 PM Arfa Daily spake thus:

He was in sunny Caffy-lornia ... Costa Mesa in Orange County, a few miles
down the Interstate from LA


OK, Arf, a small lesson in regional US dialects, free of charge:

Nobody here in "Cal-ee-fonia", as our recently departed
Governator/Gropenator called it, calls them "interstates", even though
they are, in fact, interstate highways. Some folks back east may call
them that, though I'm not sure (I've heard them referred to as
"turnpikes" in some places). One wonders whether some LA residents even
know what an "interstate" is ...

In any case, just in case you actually visit Caleefonia sometime in the
near future, you should also be aware of an important difference in
usage between SoCal (basically El-Lay and environs) and NoCal (San
Francisco and thereabouts). Down there, they don't use *any* noun for a
road (highway, interstate, etc.), but they do use articles with the road
number, as in "the 405", "the 101", etc.

But bewa up here in the Beige Area, where we like to think we're so
much superior to our SoCal cousins, we never use the article, saying
instead "take 80 to get to Berkeley" or "take 101 to 280 to 17 to get
down to Santa Cruz". (One can easily spot newcomers to San Francisco who
refer to "the 80" or "the 101". That's just SO wrong!)


I don't think Arfa is going to "blend" whether he uses your terminology
or not, and I doubt that's his objective. But you wrote an awful lot of
words without using "freeway," which is what we call the 101 here, and
is the most common word for "interstate highway" throughout the midwest,
as well. I'm not going to say unequivocally that it's widely used all
over the U.S., because I don't know for sure, but I'd bet money on it.

In cities with many freeways, they have to use more specific terms, but
when there's only one, who needs a number?

BTW, everyone I know in LA doesn't use numbers at all, but names that
are meaningless to outsiders even if they have a map: "Ventura freeway,"
"Hollywood freeway," "Pasadena freeway," etc.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 1 January 4th 09 03:29 AM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 3 January 4th 09 03:28 AM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 0 January 4th 09 03:05 AM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 0 January 3rd 09 09:33 PM
OT - Spinning yourself a legacy when everyone hates you.... Wes[_2_] Metalworking 0 January 3rd 09 07:48 PM


All times are GMT +1. The time now is 04:39 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"