Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
HP 2550L prints dirty bands on each page
The printer prints well, but it prints with a dirty band of near 2
centimeter width all across each page in the left part of it. For example, printing in B&W a text page, i can read the text all over the sheet, but the part of the band appears with a medium gray tone, darker in the center of the band an lighter in the borders. The drum is disty too. It has what i think is toner in the two roller, the white roller and the light green roller. When i clean it completely (with alcohol), it print well, without the band, sometimes just a few pages, sometimes some hundres of pages, but in the end it begins to print dirty again. I think it may be the drum that it's bad, but i'm not sure. May be any other part wich is getting the drum dirty? the drum is expensive enough for not to change ir just for testing pourpouses. any help? thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
I am a filthy whore with a dirty, dirty mouth....... | UK diy | |||
I am a filthy whore with a dirty, dirty mouth....... | Home Repair | |||
Disintegrating rubber bands | UK diy | |||
'melted' gooey rubber drive bands | Electronics Repair |